This paper describes a numerical and experimental investigation on the flexural wave propagation properties of a novel class of negative Poisson’s ratio honeycombs with tetrachiral topology. Tetrachiral honeycombs are structures defined by cylinders connected by four tangent ligaments, leading to a negative Poisson’s ratio (auxetic) behavior in the plane due to combined cylinder rotation and bending of the ribs. A Bloch wave approach is applied to the representative unit cell of the honeycomb to calculate the dispersion characteristics and phase constant surfaces varying the geometric parameters of the unit cell. The modal density of the tetrachiral lattice and of a sandwich panel having the tetrachiral as core is extracted from the integration of the phase constant surfaces, and compared with the experimental ones obtained from measurements using scanning laser vibrometers.
Skip Nav Destination
e-mail: f.scarpa@bristol.ac.uk
Article navigation
June 2010
Research Papers
Wave Propagation in Auxetic Tetrachiral Honeycombs
K. F. Tee,
K. F. Tee
Department of Aerospace Engineering,
University of Bristol
, Bristol BS8 1TR, UK
Search for other works by this author on:
A. Spadoni,
A. Spadoni
Aerospace,
California Institute of Technology
, MC 105–50, Pasadena, CA 91125
Search for other works by this author on:
F. Scarpa,
F. Scarpa
Department of Aerospace Engineering,
e-mail: f.scarpa@bristol.ac.uk
University of Bristol
, Bristol BS8 1TR, UK
Search for other works by this author on:
M. Ruzzene
M. Ruzzene
School of Aerospace Engineering,
Georgia Institute of Technology
, Ferst Drive, Atlanta, GA
Search for other works by this author on:
K. F. Tee
Department of Aerospace Engineering,
University of Bristol
, Bristol BS8 1TR, UK
A. Spadoni
Aerospace,
California Institute of Technology
, MC 105–50, Pasadena, CA 91125
F. Scarpa
Department of Aerospace Engineering,
University of Bristol
, Bristol BS8 1TR, UKe-mail: f.scarpa@bristol.ac.uk
M. Ruzzene
School of Aerospace Engineering,
Georgia Institute of Technology
, Ferst Drive, Atlanta, GAJ. Vib. Acoust. Jun 2010, 132(3): 031007 (8 pages)
Published Online: April 22, 2010
Article history
Received:
March 11, 2009
Revised:
November 10, 2009
Online:
April 22, 2010
Published:
April 22, 2010
Citation
Tee, K. F., Spadoni, A., Scarpa, F., and Ruzzene, M. (April 22, 2010). "Wave Propagation in Auxetic Tetrachiral Honeycombs." ASME. J. Vib. Acoust. June 2010; 132(3): 031007. https://doi.org/10.1115/1.4000785
Download citation file:
Get Email Alerts
Numerical Analysis of the Tread Grooves’ Acoustic Resonances for the Investigation of Tire Noise
J. Vib. Acoust (August 2024)
On Dynamic Analysis and Prevention of Transmission Squawk in Wet Clutches
J. Vib. Acoust (June 2024)
Related Articles
Kirigami Auxetic Pyramidal Core: Mechanical Properties and Wave Propagation Analysis in Damped Lattice
J. Vib. Acoust (August,2013)
Lightweight Actuator Structure With SMA Honeycomb Core and CFRP Skins
J. Mech. Des (January,2011)
Development of One-Dimensional Models for Elastic Waves in Heterogeneous Beams
J. Appl. Mech (December,2000)
Related Proceedings Papers
Related Chapters
Honeycomb Structures
Brazing Handbook, Volume 3, 6th Edition
Flexural-Fatigue Evaluation of Aluminum-Alloy and Kraft-Paper Honeycomb-Sandwich Beams
Fatigue of Composite Materials
Transverse Free Vibration Analysis of Hybrid SPR Steel Joints
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)