Abstract

This paper presents the effect of manufacturing tolerance on performance and stability boundaries of a transonic fan using a Reynolds-averaged Navier–Stokes simulation. The effects of tip gap and stagger angle variations were analyzed through a series of single passage and double passage simulation; based on which an optimal arrangement was proposed for random tip gap and random stagger angle variation for a whole annulus rotor. All simulations were carried out using NASA rotor 67 as a test case and AU3D as an in-house computational fluid dynamics solver. Results illustrate that the stagger angle variation mainly affects efficiency and its circumferential variation must be as smooth as possible. Furthermore, the tip gap variation affects the stability boundary as well as performance and its optimal configuration mandates a zigzag arrangement of blades around the annulus, i.e., larger tip gap between two smaller ones.

References

1.
Graf
,
M. B.
,
Wong
,
T. S.
,
Greizer
,
E. M.
,
Marble
,
F. E.
,
Tan
,
C. S.
,
Shin
,
H. W.
, and
Wisler
,
D. C.
,
1998
, “
Effects of Nonaxisymmetric Tip Clearance on Axial Compressor Performance and Stability
,”
ASME J. Turbomach.
,
120
(
4
), pp.
648
661
.
2.
Lange
,
A.
,
Voigt
,
M.
,
Vogeler
,
K.
,
Schrapp
,
H.
,
Johann
,
E.
, and
Gummer
,
V.
,
2010
, “
Probabilistic CFD Simulation of a High-Pressure Compressor Stage Taking Manufacturing Variability into Account
,”
Proceedings of ASME Turbo Expo 2010, Vol. 6: Structures and Dynamics, Parts A and B of Turbo Expo: Power for Land, Sea, and Air
, pp.
617
628
, Paper No. GT2010-22484.
3.
Montomoli
,
F.
,
Carnevale
,
M.
,
D’Ammaro
,
A.
,
Massini
,
M.
, and
Salvadori
,
S.
,
2015
,
Uncertainty Quantification in Computational Fluid Dynamics and Aircraft Engines
, 2nd ed. (
SpringerBriefs in Applied Sciences and Technology
),
Springer International Publishing
,
Heidelberg
.
4.
Dodds
,
J.
, and
Vahdati
,
M.
,
2015
, “
Rotating Stall Observations in a High Speed Compressor-Part 2: Numerical Study
,”
ASME J. Turbomach.
,
137
(
5
), p.
051003
.
5.
Vahdati
,
M.
, and
Imregun
,
M.
,
1996
, “
A Non-Linear Aeroelasticity Analysis of a Fan Blade Using Unstructured Dynamic Meshes
,”
Proc. IMechE Part C: J. Mech. Eng. Sci.
,
210
(
6
), pp.
549
564
.
6.
Lee
,
K. B.
,
Wilson
,
M. J.
, and
Vahdati
,
M.
,
2018
, “
Validation of a Numerical Model for Predicting Stalled Flows in a Low Speed Fan—Part 1: Modification of Spalart–Allmaras Turbulence Model
,”
ASME J. Turbomach.
,
140
(
5
), p.
051008
.
7.
Wilson
,
M. J.
,
Imregun
,
M.
, and
Sayma
,
A. I.
,
2006
, “
The Effect of Stagger Variability in Gas Turbine Fan Assemblies
,”
Proceedings of GT2006, Vol. 5: Marine; Microturbines and Small Turbomachinery; Oil and Gas Applications; Structures and Dynamics, Parts A and B of Turbo Expo: Power for Land, Sea, and Air
, pp.
1059
1069
, Paper No. GT2006-90434.
8.
Vahdati
,
M.
,
Sayma
,
A. I.
,
Freeman
,
C.
, and
Imregun
,
M.
,
2004
, “
On the Use of Atmospheric Boundary Conditions for Axial-Flow Compressor Stall Simulations
,”
ASME J. Turbomach.
,
127
(
2
), pp.
349
351
.
9.
Sayma
,
A. I.
,
Vahdati
,
M.
,
Sbardella
,
L.
, and
Imregun
,
M.
,
2000
, “
Modeling of Three-Dimensional Viscous Compressible Turbomachinery Flows Using Unstructured Hybrid Grids
,”
AIAA J.
,
38
(
6
), pp.
945
954
.
10.
Arima
,
T.
,
Sonoda
,
T.
,
Shirotori
,
M.
,
Tamura
,
A.
, and
Kikuchi
,
K.
,
1999
, “
A Numerical Investigation of Transonic Axial Compressor Using a Low-Reynolds-Number κε Turbulence Model
,”
ASME J. Turbomach.
,
121
(
1
), pp.
44
58
.
11.
Choi
,
M.
,
Baek
,
J. H.
,
Park
,
J. Y.
,
Oh
,
S. H.
, and
Ko
,
H. Y.
,
2010
, “
Effects of Low Reynolds Number on Loss Characteristics in Transonic Axial Compressor
,”
Trans. Jpn. Soc. Aero Space Sci.
,
53
(
181
), pp.
162
170
.
12.
Jennions
,
I. K.
, and
Turner
,
M. G.
,
1993
, “
Three-Dimensional Navier-Stokes Computations of Transonic Fan Flow Using an Explicit Flow Solver and an Implicit κε Solver
,”
ASME J. Turbomach.
,
115
(
2
), pp.
261
272
.
13.
Strazisar
,
A. J.
,
Wood
,
J. R.
,
Hathaway
,
M. D.
, and
Suder
,
K. L.
,
1989
, “
Laser Anemometer Measurements in a Transonic Axial-Flow Fan Rotor
,” Technical Publication NASA-TP-2879,
Lewis Research Center, NASA
,
Cleveland, OH
,
November
.
14.
Roberts
,
W. B.
,
Thorp
,
S. A.
,
Prahst
,
P. S.
, and
Strazisar
,
A. J.
,
2013
, “
The Effect of Ultrapolish on a Transonic Axial Rotor
,”
ASME J. Turbomach.
,
135
(
1
), p.
011001
.
15.
Adamczyk
,
J. J.
,
Celestina
,
M. L.
, and
Greizer
,
E. M.
,
1993
, “
The Role of Tip Clearance in High-Speed Fan Stall
,”
ASME J. Turbomach.
,
115
(
1
), pp.
28
38
.
16.
Crawley
,
E. F.
, and
Mokadam
,
D. R.
,
1984
, “
Stagger Angle Dependence of Inertial and Elastic Coupling in Bladed Disks
,”
ASME J. Vib. Acoust. Stress Reliab.
,
106
(
2
), pp.
181
188
.
17.
Stapelfeldt
,
S. C.
,
2014
, “
Advanced Methods for Multi-row Forced Response and Flutter Computation
,” PhD thesis,
Imperial College London
,
London
,
January
.
18.
Sladojevic
,
I.
,
Sayma
,
A. I.
, and
Imregun
,
M.
,
2007
, “
Influence of Stagger Angle Variation on Aerodynamic Damping and Frequency Shifts
,”
Proceedings of GT2007, Vol. 5: Turbo Expo 2007 of Turbo Expo: Power for Land, Sea, and Air
, pp.
683
700
, Paper No. GT2007-28166.
19.
Zheng
,
S.
,
Fan
,
L.
,
Teng
,
J.
, and
Qiang
,
X.
,
2017
, “
The Impact of Uncertain Stagger Angle Variation on High-Pressure Compressor Rotor Performance
,”
Proceedings of Shanghai 2017 Global Power and Propulsion Forum
, pp.
1
7
, Paper No. GPPS-2017-0045.
20.
Bazovsky
,
I.
,
2004
,
Reliability Theory and Practice
,
Dover Publication Inc
,
Mineola, NY
.
21.
Park
,
S. Y.
, and
Bera
,
A. K.
,
2009
, “
Maximum Entropy Autoregressive Conditional Heteroskedasticity Model
,”
J. Econ.
,
150
(
2
), pp.
219
230
.
22.
Lu
,
Y.
,
Green
,
J.
,
Vahdati
,
M.
, and
Stapelfeldt
,
S. C.
,
2018
, “
Effect of Geometry Variability on Fan Performance and Aeromechanical Characteristics
,”
Proceedings of 15th International Symposium on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines
, pp.
1
9
, Paper No. ISUAAAT15-095.
23.
Moore
,
R. D.
,
1982
, “
Rotor Tip Clearance Effects on Overall and Blade-Element Performance of Axial-Flow Transonic Fan Stage
,” Technical Publication NASA-TP-2049, Lewis Research Center, NASA, Cleveland, OH, September.
24.
Beheshti
,
B. H.
,
Farhanieh
,
B.
,
Teixeira
,
J. A.
,
Ivey
,
P. C.
, and
Ghorbanian
,
K.
,
2004
, “
Parametric Study of Tip Clearance-Casing Treatment on Performance and Stability of a Transonic Axial Compressor
,”
ASME J. Turbomach.
,
126
(
4
), pp.
527
535
.
25.
Thompson
,
D. W.
,
King
,
P. I.
, and
Rabe
,
D. C.
,
1998
, “
Experimental Investigation of Stepped Tip Gap Effects on the Performance of a Transonic Axial-Flow Compressor Rotor
,”
ASME J. Turbomach.
,
120
(
3
), pp.
477
486
.
26.
Montomoli
,
F.
,
Massini
,
M.
, and
Salvadori
,
S.
,
2011
, “
Geometrical Uncertainty in Turbomachinery: Tip Gap and Fillet Radius
,”
Comput. Fluids
,
46
(
1
), pp.
362
368
.
You do not currently have access to this content.