Effects of a large rotor tip gap on the performance of a one and a half stage axial compressor are investigated in detail with a numerical simulation based on large eddy simulation (LES) and available particle image velocimetry (PIV) data. This paper studies the main flow physics, including why and how the loss generation is increased with the large rotor tip gap. The present study reveals that when the tip gap becomes large, tip clearance fluid goes over the tip clearance core vortex and enters into the next blade's tip gap, which is called double-leakage tip clearance flow. As the tip clearance flow enters into the adjacent blade's tip gap, a vortex rope with a lower pressure core is generated. This vortex rope breaks up the tip clearance core vortex of the adjacent blade, resulting in a large additional mixing. This double-leakage tip clearance flow occurs at all the operating conditions, from design flow to near stall condition, with the large tip gap for the current compressor stage. The double-leakage tip clearance flow, its interaction with the tip clearance core vortex of the adjacent blade, and the resulting large mixing loss are the main flow mechanism of the large rotor tip gap in the compressor. When the tip clearance is smaller, flow near the end wall follows more closely with the main passage flow and this double-leakage tip clearance flow does not happen near the design flow condition for the current compressor stage. When the compressor with a large tip gap operates at near stall operation, a strong vortex rope is generated near the leading edge due to the double-leakage flow. Part of this vortex separates from the path of the tip clearance core vortex and travels from the suction side of the blade toward the pressure side of the blade. This vortex is generated periodically at near stall operation with a large tip gap. As the vortex travels from the suction side to the pressure side of the blade, a large fluctuation of local pressure forces blade vibration. Nonsynchronous blade vibration occurs due to this vortex as the frequency of this vortex generation is not the same as the rotor. The present investigation confirms that this vortex is a part of separated tip clearance vortex, which is caused by the double-leakage tip clearance flow.
Skip Nav Destination
Article navigation
June 2017
Research-Article
Effects of Double-Leakage Tip Clearance Flow on the Performance of a Compressor Stage With a Large Rotor Tip Gap
Chunill Hah
Chunill Hah
Search for other works by this author on:
Chunill Hah
Contributed by the International Gas Turbine Institute (IGTI) of ASME for publication in the JOURNAL OF TURBOMACHINERY. Manuscript received November 7, 2016; final manuscript received November 18, 2016; published online February 1, 2017. Editor: Kenneth Hall.
This material is declared a work of the U.S. Government and is not subject to copyright protection in the United States. Approved for public release; distribution is unlimited.
J. Turbomach. Jun 2017, 139(6): 061006 (9 pages)
Published Online: February 1, 2017
Article history
Received:
November 7, 2016
Revised:
November 18, 2016
Citation
Hah, C. (February 1, 2017). "Effects of Double-Leakage Tip Clearance Flow on the Performance of a Compressor Stage With a Large Rotor Tip Gap." ASME. J. Turbomach. June 2017; 139(6): 061006. https://doi.org/10.1115/1.4035521
Download citation file:
Get Email Alerts
Evaluating Thin-Film Thermocouple Performance on Additively Manufactured Turbine Airfoils
J. Turbomach (July 2025)
Related Articles
Experimental and Numerical Investigation of a Circumferential Groove Casing Treatment in a Low-Speed Axial Research Compressor at Different Tip Clearances
J. Turbomach (December,2017)
Loss and Deviation in Windmilling Fans
J. Turbomach (October,2016)
High Resolution RANS Nonlinear Harmonic Study of Stage 67 Tip Injection Physics
J. Turbomach (May,2015)
Desensitization of Axial Compressor Performance and Stability to Tip Clearance Size
J. Turbomach (March,2016)
Related Chapters
Aerodynamic Performance Analysis
Axial-Flow Compressors
Pulsation and Vibration Analysis of Compression and Pumping Systems
Pipeline Pumping and Compression Systems: A Practical Approach, Second Edition
Pulsation and Vibration Analysis of Compression and Pumping Systems
Pipeline Pumping and Compression System: A Practical Approach, Third Edition