... elastohydrodynamic lubrication transverse isotropy stiffness matrix impact loading point contact contact mechanics fluid-film lubrication squeeze films Ministry of Science and Technology, Taiwan 10.13039/501100004663 NSTC 111-2811-E-006-045-MY2 NSTC 111-2221-E-006-144-MY2...

... 2023 12 05 2023 mixed-EHL thermal effect intermittent motion rough surface elastohydrodynamic lubrication fluid film lubrication friction squeeze films surface roughness and asperities thermoelastohydrodynamic lubrication Intermittent motion transmission is a common type...

...(70)90006-0 [17] Zeidan , F. Y. , San Andrés , L. , and Vance , J. M. , 1996 , “ Design and Application of Squeeze Film Dampers in Rotating Machinery ,” Proceedings of the 25th Turbomachinery Symposium , Texas A&M University, Houston, TX , Sept. 17–19 , pp. 169 – 188...

...Jianzhong Cui; Jun Liu; Fangwei Xie; Cuntang Wang; Pengliang Hou The object of this work is to investigate the effect of the change of film pressure resulting from axial squeeze-film motion between driving and driven disks on the performance of hydroviscous drive (HVD). A simplified mathematical...

.... 26 03 2018 17 04 2018 Elastohydrodynamic lubrication Squeeze films The authors have to be commended for a concise description of their noteworthy approach to solving the transient EHL problem [ 1 ]. The significance of the work can probably be summarized by three remarks: (1...

... of those descriptions alone. It is also important to note that this additional implementation made use of their own solid and fluid finite elements not reported in either paper noted (or in Ref. [ 3 ]). Elastohydrodynamic lubrication Squeeze films 01 04 2018 03 04 2018...

... 03 2018 Cavitation Gas (air) bearings Hydrodynamic lubrication Squeeze films The author of paper [ 1 ] would like to thank Professors Boedo and Booker for the relevant discussion. Their main concern is about the lack of reference pertaining to cavitation modeling in the state...

... for publication in the J OURNAL OF T RIBOLOGY . Manuscript received December 13, 2016; final manuscript received March 1, 2018; published online April 26, 2018. Assoc. Editor: Daejong Kim. 13 12 2016 01 03 2018 Fluid film lubrication Gas (air) bearings Squeeze films Gas foil...

... received July 27, 2017; final manuscript received January 31, 2018; published online March 30, 2018. Assoc. Editor: Joichi Sugimura. 27 07 2017 31 01 2018 Cavitation Films Grinding Hydrodynamic lubrication Squeeze films Ultrasonic vibration honing (UVH) is an important...

... manuscript received November 6, 2017; published online February 6, 2018. Assoc. Editor: Mihai Arghir. 21 05 2017 06 11 2017 Bearing design Elastohydrodynamic lubrication Fluid film lubrication Hydrodynamic lubrication Squeeze films A major application of transient...

...Noël Brunetière; Antoinette Blouin; Guytri Kastane An experimental test rig has been used to analyze the lift-off condition of a squeeze film thrust bearing. It is composed of a vibrating flat plate linked to a piezo-actuator, a cylindrical mass, and two displacement sensors. The frequency...

... . Manuscript received April 11, 2017; final manuscript received July 28, 2017; published online September 29, 2017. Assoc. Editor: Sinan Muftu. 11 04 2017 28 07 2017 Adhesion Cavitation Squeeze films The reed valve is widely used in the discharge part of refrigerant compressors...

... Squeeze films 13 10 2015 15 03 2016 Contributed by the Tribology Division of ASME for publication in the J OURNAL OF T RIBOLOGY . Manuscript received October 13, 2015; final manuscript received March 15, 2016; published online July 22, 2016. Assoc. Editor: Sinan Muftu. 1...

... of few microns (i.e., 0.01 < Kn < 1), the rarefied gas exists in the noncontinuum regime and, as such, the DSMC method is used to simulate the fluid behavior. The impact of the squeeze film on the beam is investigated over a range of frequencies and velocity amplitudes, corresponding to ranges...

... develop over a large film pocket in the limit of conformal journal and sleeve contact even with relatively high modulus materials such as steel. Elastohydrodynamic lubrication Journal bearings Squeeze films Conformal elastohydrodynamic lubrication (EHL), or “soft” EHL, refers to conformal...

... of transient deformation on lubricant pressure is explored, with its consideration necessary for accurate analysis. Elastohydrodynamic lubrication Fluid film lubrication Hydrodynamic lubrication Hydrostatic lubrication Pressurized bearings Squeeze films Thermoelastohydrodynamic lubrication...

.... Nikas. 23 11 2014 04 02 2015 31 03 2015 This study presents combined effects of couple stress fluids and rotational inertia together with considering lubricant viscosity variation with pressure in squeeze film characteristics of parallel annular plates. Squeeze film...

... loading, the transient film thickness deviates markedly from the corresponding steady-state behavior and this departure is a function of lubricant rheology. Bearings Elastohydrodynamic lubrication Gears lubricants Rheology Rolling Squeeze films Viscosity It is well-known...

... Contact of a Thick Elastic Layer and the Associated Squeeze Film Problem ,” Proc. Inst. Mech. Eng., Part J , 222 ( 1 ), pp. 61 – 68 . 10.1243/13506501JET372 [4] Jin , Z. , 2000 , “ Elastohydrodynamic Lubrication of a Circular Point Contact for a Compliant Layered Surface Bonded to a Rigid...