Cost-effective integrated storage systems are important components for the accelerated market penetration of solarthermal power plants. Besides extended utilization of the power block, the main benefits of storage systems are improved efficiency of components, and facilitated integration into the electrical grids. For parabolic trough power plants using synthetic oil as the heat transfer medium, the application of solid media sensible heat storage is an attractive option in terms of investment and maintenance costs. For commercial oil trough technology, a solid media sensible heat storage system was developed and tested. One focus of the project was the cost reduction of the heat exchanger; the second focus lies in the energetic and exergetic analysis of modular storage operation concepts, including a cost assessment of these concepts. The results show that technically there are various interesting ways to improve storage performance. However, these efforts do not improve the economical aspect. Therefore, the tube register with straight parallel tubes without additional structures to enhance heat transfer has been identified as the best option concerning manufacturing aspects and investment costs. The results of the energetic and exergetic analysis of modular storage integration and operation concepts show a significant potential for economic optimization. An increase of more than 100% in storage capacity or a reduction of more than a factor of 2 in storage size and therefore investment cost for the storage system was calculated. A complete economical analysis, including the additional costs for this concept on the solar field piping and control, still has to be performed.

1.
Steinmann
,
W.-D.
,
Eck
,
M.
, and
Laing
,
D.
, 2005, “
Solarthermal Parabolic Trough Power Plants With Integrated Storage Capacity
,”
Int. J. Energy Technology and Policy
,
3
, pp.
123
136
.
2.
Laing
,
D.
,
Steinmann
,
W. D.
,
Tamme
,
R.
, and
Richter
,
C.
, 2004, “
Development and Experimental Results of Thermal Energy Storage Technologies for Parabolic Trough Power Plants
,”
Proceedings EuroSun 2004
,
14. International Sonnenforum
, Vol.
1
, pp.
891
900
.
3.
Laing
,
D.
,
Steinmann
,
W. D.
,
Tamme
,
R.
, and
Richter
,
C.
, 2006, “
Solid Media Thermal Storage for Parabolic Trough Power Plants
,”
Sol. Energy
0038-092X,
80
(
10
), pp.
1283
1289
.
4.
Tamme
,
R.
,
Laing
,
D.
, and
Steinmann
,
W. D.
, 2004, “
Advanced Thermal Energy Storage Technology for Parabolic Trough
,”
ASME J. Sol. Energy Eng.
0199-6231,
126
, pp.
794
800
.
5.
Steinmann
,
W. D.
, 2006, “
Development and Application of the Modelica Library TechThermo
,”
COMSAT Tech. Rev.
0095-9669,
12
, pp.
51
73
.
You do not currently have access to this content.