Skip Nav Destination
Issues
June 2009
ISSN 0094-9930
EISSN 1528-8978
Editorial
Editorial
J. Pressure Vessel Technol. June 2009, 131(3): 030201.
doi: https://doi.org/10.1115/1.3121536
Topics:
Computer software
,
Pressure vessels
,
Rendering
Research Papers
Design and Analysis
Effect of Precompression on Thickness of Pipe During Bending
J. Pressure Vessel Technol. June 2009, 131(3): 031201.
doi: https://doi.org/10.1115/1.3067036
Topics:
Pipes
,
Compression
Thermal Elastic-Plastic Analysis Considering Temperature Rise by Rapid Plastic Deformation in Undermatched Joints
J. Pressure Vessel Technol. June 2009, 131(3): 031202.
doi: https://doi.org/10.1115/1.3027477
Stamina of a Nongasketed Flange Joint Under Combined Internal Pressure, Axial, and Bending Loading: An Experimental Study
J. Pressure Vessel Technol. June 2009, 131(3): 031203.
doi: https://doi.org/10.1115/1.3110039
Topics:
Flanges
,
Pressure
,
Stress
,
Pipes
,
Sealing (Process)
Structural Response of Piping to Internal Gas Detonation
J. Pressure Vessel Technol. June 2009, 131(3): 031204.
doi: https://doi.org/10.1115/1.3089497
Topics:
Explosions
,
Pressure
,
Waves
,
Deformation
,
Stress
,
Pipes
Study on Dynamic Strength Evaluation Method of Mechanical Members Based on Energy Balance
J. Pressure Vessel Technol. June 2009, 131(3): 031205.
doi: https://doi.org/10.1115/1.3109990
Topics:
Energy budget (Physics)
,
Failure
,
Fatigue failure
,
Stainless steel
,
Vibration
,
Waves
,
Carbon steel
,
Fatigue
,
Fracture (Materials)
Estimation of Point Vibration Loads From Field Measurements for Industrial Piping
J. Pressure Vessel Technol. June 2009, 131(3): 031206.
doi: https://doi.org/10.1115/1.3109986
Topics:
Pipes
,
Stress
,
Vibration
,
Compressors
Strength Model Uncertainties of Burst, Yielding, and Excessive Bending of Piping
J. Pressure Vessel Technol. June 2009, 131(3): 031207.
doi: https://doi.org/10.1115/1.3109983
Topics:
Pipes
,
Pressure
,
Uncertainty
,
Stress
,
Design
Stress Intensity Factors of Various Surface Cracks Inside a Hollow Cylinder Under Steady State Thermal Striping
J. Pressure Vessel Technol. June 2009, 131(3): 031208.
doi: https://doi.org/10.1115/1.3109978
Topics:
Cylinders
,
Fracture (Materials)
,
Steady state
,
Surface cracks
,
Stress
Structural Response Optimization of a Light-Weight Composite Blast Containment Vessel
J. Pressure Vessel Technol. June 2009, 131(3): 031209.
doi: https://doi.org/10.1115/1.3110013
Topics:
Composite materials
,
Containment vessels
,
Design
,
Optimization
,
Vessels
,
Finite element model
,
Steel
,
Finite element analysis
,
Weight (Mass)
Experimental Evaluation of the Bending Load Effect on the Failure Pressure of Wall-Thinned Elbows
J. Pressure Vessel Technol. June 2009, 131(3): 031210.
doi: https://doi.org/10.1115/1.3122032
A Numerical Study on the Sensitivity of the Discrete Element Method for Hopper Discharge
J. Pressure Vessel Technol. June 2009, 131(3): 031211.
doi: https://doi.org/10.1115/1.3122022
Topics:
Flow (Dynamics)
,
Friction
,
Particulate matter
,
Simulation
,
Stress
,
Discrete element methods
,
Sensitivity analysis
,
Probability
,
Density
Fluid-Structure Interaction
Two-Phase Flow-Induced Vibration of Parallel Triangular Tube Arrays With Asymmetric Support Stiffness
J. Pressure Vessel Technol. June 2009, 131(3): 031301.
doi: https://doi.org/10.1115/1.3062964
Topics:
Flow (Dynamics)
,
Two-phase flow
,
Fluids
,
Stiffness
,
Porosity
,
Stability
,
Vibration
,
Cross-flow
,
Flow-induced vibrations
Fluid-Structure Interaction Effects Modeling for the Modal Analysis of a Steam Generator Tube Bundle
J. Pressure Vessel Technol. June 2009, 131(3): 031302.
doi: https://doi.org/10.1115/1.3062940
Topics:
Boilers
,
Finite element analysis
,
Fluid structure interaction
,
Fluids
,
Modal analysis
,
Modeling
,
Heat exchangers
Further Study of Quasiperiodic Vibration Excitation Forces in Rotated Triangular Tube Bundles Subjected to Two-Phase Cross Flow
J. Pressure Vessel Technol. June 2009, 131(3): 031303.
doi: https://doi.org/10.1115/1.3095613
Topics:
Cylinders
,
Drag (Fluid dynamics)
,
Flow (Dynamics)
,
Lift (Fluid dynamics)
,
Water
,
Porosity
,
Vibration
,
Excitation
Development of Weighted Residual Based Lattice Boltzmann Techniques for Fluid-Structure Interaction Application
J. Pressure Vessel Technol. June 2009, 131(3): 031304.
doi: https://doi.org/10.1115/1.3089494
Topics:
Finite element analysis
,
Fluid structure interaction
,
Fluids
,
Lattice Boltzmann methods
,
Shells
,
Shapes
,
Ducts
,
Flow (Dynamics)
A Probabilistic Assessment Technique Applied to a Cracked Heat Exchanger Tube Subjected to Flow-Induced Vibration
J. Pressure Vessel Technol. June 2009, 131(3): 031305.
doi: https://doi.org/10.1115/1.3109989
Topics:
Flow (Dynamics)
,
Flow-induced vibrations
,
Fracture (Materials)
,
Heat exchangers
,
Leakage
,
Failure
,
Modeling
,
Vibration
,
Fluids
,
Clearances (Engineering)
Numerical Simulation of the Flow-Sound Interaction Mechanisms of a Single and Two-Tandem Cylinders in Cross-Flow
J. Pressure Vessel Technol. June 2009, 131(3): 031306.
doi: https://doi.org/10.1115/1.3110029
Topics:
Acoustics
,
Cylinders
,
Flow (Dynamics)
,
Resonance
,
Cross-flow
,
Vortex shedding
Wind Effects on Dynamic Response of a Floating Roof in a Cylindrical Liquid Storage Tank
J. Pressure Vessel Technol. June 2009, 131(3): 031307.
doi: https://doi.org/10.1115/1.3121538
Topics:
Roofs
,
Wind
,
Storage tanks
,
Wind pressure
Materials and Fabrication
Analyses on the Short-Term Mechanical Properties of Plastic Pipe Reinforced by Cross Helically Wound Steel Wires
J. Pressure Vessel Technol. June 2009, 131(3): 031401.
doi: https://doi.org/10.1115/1.3066826
Topics:
Composite materials
,
Steel
,
Wire
,
Winding (process)
,
Stress
,
Pressure
,
Pipes
,
Mechanical properties
,
Stress analysis (Engineering)
Four-Point Fatigue Testing of Pressurized Composite Pipe
J. Pressure Vessel Technol. June 2009, 131(3): 031402.
doi: https://doi.org/10.1115/1.3008036
Topics:
Failure
,
Pipes
,
Stress
,
Composite materials
,
Cycles
Assessment and Test of the Creep-Fatigue Crack Behavior for a High Temperature Component
J. Pressure Vessel Technol. June 2009, 131(3): 031403.
doi: https://doi.org/10.1115/1.3110024
Topics:
Creep
,
Fatigue
,
Fracture (Materials)
,
Stress
,
Stainless steel
A Comparison of the tanh and Exponential Fitting Methods for Charpy V-Notch Energy Data
J. Pressure Vessel Technol. June 2009, 131(3): 031404.
doi: https://doi.org/10.1115/1.3109987
Strain Rate Dependence and Short-Term Relaxation Behavior of a Thermoset Polymer at Elevated Temperature: Experiment and Modeling
J. Pressure Vessel Technol. June 2009, 131(3): 031405.
doi: https://doi.org/10.1115/1.3110025
Topics:
Polymers
,
Relaxation (Physics)
,
Stress
,
Stress-strain curves
,
Deformation
,
Modeling
,
Viscoplasticity
,
Equilibrium (Physics)
Evaluation of Two-Parameter Approaches to Describe Crack-Tip Fields in Engineering Structures
J. Pressure Vessel Technol. June 2009, 131(3): 031406.
doi: https://doi.org/10.1115/1.3120266
Topics:
Finite element analysis
,
Fracture (Materials)
,
Stress
,
Geometry
Assessment Procedure for Multiple Volumetric Flaws in Diagram
J. Pressure Vessel Technol. June 2009, 131(3): 031407.
doi: https://doi.org/10.1115/1.3110036
Topics:
Collapse
,
Pressure
,
Stress
,
Cylinders
,
Fitness-for-service
,
Finite element analysis
Performance of a Drum Type Packaging With Urethane Foam Overpack Subjected to Crush and Other Regulatory Tests
J. Pressure Vessel Technol. June 2009, 131(3): 031408.
doi: https://doi.org/10.1115/1.3120264
Topics:
Containment vessels
,
Packaging
,
Testing
,
Urethane foam
,
Engineering prototypes
,
Leakage
,
Temperature
Fracture Assessment Procedures for Steel Pipelines Using a Modified Reference Stress Solution
J. Pressure Vessel Technol. June 2009, 131(3): 031409.
doi: https://doi.org/10.1115/1.3122769
Topics:
Finite element analysis
,
Fracture (Materials)
,
Pipes
,
Stress
,
Pipelines
Thermal Shock Testing and Analysis of IN617 and Super 304H Samples
J. Pressure Vessel Technol. June 2009, 131(3): 031410.
doi: https://doi.org/10.1115/1.3120265
Topics:
Creep
,
Cycles
,
Damage
,
Stress
,
Temperature
,
Testing
,
Thermal shock
,
Fracture (Process)
,
Boilers
,
Fracture (Materials)
Pipeline Systems
New Developments for the Description of Oil Leakages by Advective Migration From Submarine Pipelines
Renan Martins Baptista, Ricardo Antonio Francisco Machado, Marintho Bastos Quadri, Ariovaldo Bolzan, André Lourenço Nogueira, Toni Jefferson Lopes
J. Pressure Vessel Technol. June 2009, 131(3): 031701.
doi: https://doi.org/10.1115/1.3089499
Topics:
Leakage
,
Water
,
Pipelines
,
Simulation
,
Underwater pipelines
Reliability-Based Design and Assessment Standards for Onshore Natural Gas Transmission Pipelines
J. Pressure Vessel Technol. June 2009, 131(3): 031702.
doi: https://doi.org/10.1115/1.2902281
Topics:
Design
,
Pipelines
,
Reliability
,
Safety
Technology Reviews
The Fabulous Nuclear Odyssey of Belgium
J. Pressure Vessel Technol. June 2009, 131(3): 034001.
doi: https://doi.org/10.1115/1.3106035
Topics:
Accidents
,
Design
,
Energy generation
,
Fuels
,
Nuclear fuel cycle
,
Nuclear power stations
,
Reactor vessels
,
Safety
,
Construction
,
Governments
Technical Briefs
Circulation in Blowdown Flows
J. Pressure Vessel Technol. June 2009, 131(3): 034501.
doi: https://doi.org/10.1115/1.3110038
Topics:
Flow (Dynamics)
,
Heat conduction
,
Pressure vessels
,
Vessels
,
Temperature
,
Density
,
Boundary layers
Elimination of Thermoacoustic Furnace Vibration in a Gas-Fired Package Boiler: A Case Study
J. Pressure Vessel Technol. June 2009, 131(3): 034502.
doi: https://doi.org/10.1115/1.3109982
Experimental and FEA Investigations on the Fracture Properties of Pipe Structures Under Internal Pressure in DBTT Region
J. Pressure Vessel Technol. June 2009, 131(3): 034503.
doi: https://doi.org/10.1115/1.3110015
Topics:
Damage
,
Finite element analysis
,
Fracture (Materials)
,
Fracture toughness
,
Pipes
,
Stress
,
Temperature
,
Pressure
,
Density
Design Innovation
Design Formulas of Blind End Closures for High Pressure Vessels
J. Pressure Vessel Technol. June 2009, 131(3): 035001.
doi: https://doi.org/10.1115/1.2967886
Impact Mitigation for Buried Structures: Demolition of the New Haven Veterans Memorial Coliseum
Pawel Woelke, Margaret Tang, Scott McClennan, Najib Abboud, Darren Tennant, Adam Hapij, Mohammed Ettouney
J. Pressure Vessel Technol. June 2009, 131(3): 035002.
doi: https://doi.org/10.1115/1.3109979
Topics:
Bridges (Structures)
,
Design
,
Finite element model
,
Public utilities
,
Soil
,
Demolition
,
Tires
Email alerts
RSS Feeds
The Behavior of Elbow Elements at Pure Bending Applications Compared to Beam and Shell Element Models
J. Pressure Vessel Technol (February 2025)