In this paper, we introduce a new type of spatial parallel robot that is comprised of soft inflatable constraints called trichamber actuators (TCAs). We extend the principles of the freedom and constraint topologies (FACT) synthesis approach to enable the synthesis and analysis of this new type of soft robot. The concepts of passive and active freedom spaces are introduced and applied to the design of general parallel systems that consist of active constraints (i.e., constraint that can be actuated to impart various loads onto the system's stage) that both drive desired motions and guide the system's desired degrees of freedom (DOFs). We provide the fabrication details of the TCA constraints introduced in this paper and experimentally determine their appropriate FACT-based constraint model. We fabricate a soft parallel robot that consists of three TCA constraints and verify and validate its FACT-predicted performance using finite element analysis (FEA) and experimental data. Other such soft robots are synthesized using FACT as case studies.
Issue Section:
Research Papers
Keywords:
Actuators,
Compliant mechanisms,
Mechanism synthesis,
Parallel platforms,
Soft robots,
Transmissions
Topics:
Robots,
Stiffness,
Stress,
Wire,
Actuators,
Finite element analysis,
Kinematics,
Pressure,
Rotation
References
1.
Trivedi
, D.
, Rahn
, C. D.
, Kierb
, W. M.
, and Walker
, I. D.
, 2008
, “Soft Robotics: Biological Inspiration, State of the Art, and Future Research
,” Appl. Bionics Biomech.
, 5
(3
), pp. 99
–117
.10.1080/117623208025578652.
Iida
, F.
, and Laschi
, C.
, 2011
, “Soft Robotics: Challenges and Perspectives
,” Procedia Comput. Sci.
, 7
, pp. 99
–102
.10.1016/j.procs.2011.12.0303.
Kim
, S.
, Laschi
, C.
, and Trimmer
, B.
, 2013
, “Soft Robotics: A Bioinspired Evolution in Robotics
,” Trends Biotechnol.
, 31
(5
), pp. 287
–294
.10.1016/j.tibtech.2013.03.0024.
Morin
, S. A.
, Shepart
, R. F.
, Kwok
, S. W.
, Kwok
, S. W.
, Stokes
, A. A.
, Nemiroski
, A.
, and Whitesides
, G. M.
, 2012
, “Camouflage and Display for Soft Machines
,” Science
, 337
(6096
), pp. 828
–832
.10.1126/science.12221495.
McMahn
, W.
, Chitrakaran
, V.
, Csencsits
, M.
, Dawson
, D.
, Walker
, I. D.
, Jones
, B. A.
, Pritts
, M.
, Dienno
, D.
, Grissom
, M.
, and Rahn
, C. D.
, 2006
, “Field Trials and Testing of the OctArm Continuum Manipulator
,” 2006 IEEE International Conference on Robotics and Automation
(ICRA 2006
), Orlando, FL, May 15–19, pp. 2336
–2341
10.1109/ROBOT.2006.1642051.6.
Bishop-Moser
, J.
, Krishnan
, G.
, Kim
, C.
, and Kota
, S.
, 2012
, “Design of Soft Robotic Actuators Using Fluid Filled Fiber-Reinforced Elastomeric Enclosures in Parallel Combinations
,” 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems
(IROS 2012
), Vilamoura, Portugal, Oct. 7–12, pp. 4264
–4269
10.1109/IROS.2012.6385966.7.
Hirai
, S.
, Cusin
, P.
, Tanigawa
, H.
, Masui
, T.
, Konishi
, S.
, and Kawamura
, S.
, 2000
, “Qualitative Synthesis of Deformable Cylindrical Actuators Through Constraint Topology
,” IEEE/RSJ International Conference on Intelligent Robots and Systems
(IROS 2000
), Takamatsu, Japan, Oct. 31–Nov. 5, pp. 197
–202
10.1109/IROS.2000.894604.8.
Hirai
, S.
, Masui
, T.
, and Kawamura
, S.
, 2001
, “Prototyping Pneumatic Group Actuators Composed of Multiple Single-Motion Elastic Tubes
,” IEEE International Conference on Robotics and Automation
(2001 ICRA
), Seoul, South Korea, May 21–26, pp. 3807
–3812
10.1109/ROBOT.2001.933211.9.
Suzumori
, K.
, Iikura
, S.
, and Tanaka
, H.
, 1991
, “Development of Flexible Microactuator and Its Applications to Robotic Mechanisms
,” IEEE International Conference on Robotics and Automation
(ICRA
), Sacramento, CA, Apr. 9–11, pp. 1622
–1627
10.1109/ROBOT.1991.131850.10.
Martinez
, R. V.
, Branch
, J. L.
, Fish
, C. R.
, Jin
, L.
, Shepherd
, R. F.
, Nunes
, R. M. D.
, Suo
, Z.
, and Whitesides
, G. M.
, 2013
, “Robotic Tentacles With Three-Dimensional Mobility Based on Flexible Elastomers
,” Adv. Mater.
, 25
(2
), pp. 205
–212
.10.1002/adma.20120300211.
Merlet
, J.-P.
, 2006
, Parallel Robots
, 2nd ed., Springer
, Dordrecht, The Netherlands
.12.
Bothema
, R.
, and Roth
, B.
, 1990
, Theoretical Kinematics
, Dover
, New York
.13.
Hopkins
, J. B.
, and Culpepper
, M. L.
, 2010
, “Synthesis of Multi-Degree of Freedom, Parallel Flexure System Concepts Via Freedom and Constraint Topology (FACT)—Part I: Principles
,” Precis. Eng.
, 34
(2
), pp. 259
–270
.10.1016/j.precisioneng.2009.06.00814.
Hopkins
, J. B.
, 2007
, “Design of Parallel Flexure Systems Via Freedom and Constraint Topologies (FACT)
,” Master's thesis, Massachusetts Institute of Technology, Cambridge, MA.15.
Ball
, R. S.
, 1900
, A Treatise on the Theory of Screws
, The University Press
, Cambridge, UK
.16.
Phillips
, J.
, 1984
, Freedom in Machinery: Volume 1, Introducing Screw Theory
, Cambridge University Press
, New York
.17.
Hopkins
, J. B.
, 2010
, “Design of Flexure-Based Motion Stages for Mechatronic Systems Via Freedom, Actuation and Constraint Topologies (FACT)
,” Ph.D. thesis, Massachusetts Institute of Technology, Cambridge, MA.18.
Hopkins
, J. B.
, and Culpepper
, M. L.
, 2010
, “A Screw Theory Basis for Quantitative and Graphical Design Tools That Define Layout of Actuators to Minimize Parasitic Errors in Parallel Flexure Systems
,” Precis. Eng.
, 34
(4
), pp. 767
–776
.10.1016/j.precisioneng.2010.05.00419.
Su
, H.-J.
, Hongliang
, S.
, and Yu
, J. J.
, 2012
, “A Symbolic Formulation for Analytical Compliance Analysis and Synthesis of Flexure Mechanisms
,” ASME J. Mech. Des.
, 134
(5
), p. 051009
.10.1115/1.400644120.
Stewart
, D.
, 1965
, “A Platform With Six Degrees of Freedom
,” Proc. Inst. Mech. Eng.
, 180
(1
), pp. 371
–386
.10.1243/PIME_PROC_1965_180_029_0221.
Uicker
, J. J.
, Pennock
, G. R.
, and Shigley
, J. E.
, 2011
, Theory of Machines and Mechanisms
, 4th ed., Oxford University Press
, New York
.Copyright © 2015 by ASME
You do not currently have access to this content.
