... for the breakaway torque values in both the tightening and loosening directions. Evaluation of the torque-angle control of the tightening process is made, and a modified torque-angle control approach is proposed. The effect of friction coefficients on the error in the clamping force prediction is analyzed...

... are developed in order to collect real-time data on the rate of clamp load loss per cycle as well as the loosening rotation of the bolt head. Three levels of hole clearance are investigated; namely, 3%, 6%, and 10% of the bolt nominal diameter. For the commonly used 2A thread fit for a selected bolt size, three...

...Sayed A. Nassar; Payam H. Matin The amount of clamp load loss due to a fully reversed cyclic service load is determined for a bolted assembly in which the fastener and the joint were both tightened initially beyond their respective proportional limits. The cyclic reversed load acts in a direction...

...Sayed A. Nassar; Payam H. Matin Closed form solution for the amount of clamp load loss due to an externally applied separating force is determined for a bolted assembly in which the fastener is initially tightened beyond its proportional limit. The joint may or may not have been yielded at initial...

.... The proposed method is demonstrated for single-input and single-output mechanisms and illustrated with several two-dimensional examples of synthesis of multimaterial mechanisms of force inverters and gripping and clamping devices. An analysis on the formation of de facto hinges is presented based on the shape...