...Quinton Porter; Zhijian Pei; Chao Ma The ability to produce a dense part of Al-based metal matrix nanocomposites using binder jetting followed by infiltration was investigated. A green density above 1.58 g/cm 3 was determined to be necessary for spontaneous direct liquid infiltration to commence...

... such coatings, in the present study, a novel low-friction coefficient nanocomposite coating: CrAlSiN/gradient (G)-CrAlSiCN was developed which can be used in high-speed or dry machining applications. Initially, CrAlSiN nanocomposite coating and carbon incorporated CrAlSiN coating were deposited separately using...

...Bao Le; Jibran Khaliq; Dehong Huo; Xiangyu Teng; Islam Shyha Micromachining of nanocomposites is deemed to be a complicated process due to the anisotropic, heterogeneous structure, and advanced mechanical properties of these materials associated with the size effects in micromachining. It leads...

...Bao Le; Jibran Khaliq; Dehong Huo; Xiangyu Teng; Islam Shyha Micromachining of nanocomposites is deemed to be a complicated process due to the anisotropic, heterogeneous structure and advanced mechanical properties of these materials associated with the size effects in micromachining. It leads...

..., the addition of graphene to a conventional two-phase glass fiber epoxy composite is seen to improve not only its mechanical properties but also its machinability. hierarchical composites graphene platelets micromachining nanocomposites Conventional two-phase fiber-reinforced composite...

...( a ) also shows that the cutting forces observed in micromilling of epoxy-based GPL composites do not appear to be sensitive to the MCT phenomena. This is also the case for thermoplastic nanocomposites [ 10 ]. Fig. 5 Effecting of graphene loading on the cutting force Figure 5( b ) depicts...

...Chang Ye; Gary J. Cheng Nanocomposite and multiphase structures have become more important nowadays to enhance the mechanical properties of materials. Laser shock peening (LSP) is one of the most efficient ways to increase component fatigue life. In this paper, numerical and experimental studies...

...Guoping Cao; Hiromi Konishi; Xiaochun Li Magnesium, the lightest structural metal, is of significance to improve energy efficiency in various applications. Mg ∕ Si C nanocomposites were successfully fabricated by ultrasonic cavitation based dispersion of SiC nanoparticles in Mg melts. As compared...

...Yong Yang; Xiaochun Li Lightweight metal matrix nanocomposites (MMNCs) (metal matrix with nanosized ceramic particles) can be of significance for automobile, aerospace, and numerous other applications. It would be advantageous to develop effective nanomanufacturing methods for fabrication of bulk...

...Yong Yang; Xiaochun Li Lightweight metal–matrix nanocomposites (MMNCs) (metal matrix with nanosized ceramic particles) can be of significance for automobile, aerospace, and numerous other applications. It would be advantageous to develop effective nanomanufacturing methods for fabrication of bulk...

...J. Samuel; R. E. DeVor; S. G. Kapoor; K. J. Hsia The machinability of a polycarbonate nanocomposite containing multiwalled carbon nanotubes is investigated and contrasted with its base polymer and with a conventional carbon fiber composite. The material microstructures are characterized using...