Topics: Laser beams , Lasers , Metals , Sintering , Temperature , Melting , Porosity , Computer simulation , Finite volume methods , Natural convection

Development of a Computer Simulation Model for Blowing Glass Containers

C. G. Giannopapa

J. Manuf. Sci. Eng. August 2008, 130(4): 041003. doi: https://doi.org/10.1115/1.2951925

Abstract

View articletitled, Development of a Computer Simulation Model for Blowing Glass Containers

Open the PDF for in another window

Topics: Flow (Dynamics) , Glass , Glass containers , Computer simulation , Viscosity

Thermal and Structural Deformations During Diamond Turning of Rotationally Symmetric Structured Surfaces

Stefan Rakuff, Paul Beaudet

J. Manuf. Sci. Eng. August 2008, 130(4): 041004. doi: https://doi.org/10.1115/1.2951929

Abstract

View articletitled, Thermal and Structural Deformations During Diamond Turning of Rotationally Symmetric Structured Surfaces

Open the PDF for in another window

Topics: Cutting , Cutting tools , Diamond turning , Errors , Machinery , Machining , Temperature , Deformation , Deflection , Manufacturing

Support Vector Fuzzy Adaptive Network in the Modeling of Material Removal Rate in Rotary Ultrasonic Machining

Judong Shen, Z. J. Pei, E. S. Lee

J. Manuf. Sci. Eng. August 2008, 130(4): 041005. doi: https://doi.org/10.1115/1.2951935

Abstract

View articletitled, Support Vector Fuzzy Adaptive Network in the Modeling of Material Removal Rate in Rotary Ultrasonic Machining

Open the PDF for in another window

Topics: Algorithms , Modeling , Support vector machines , Ultrasonic machining

Experimental Investigation of Springback Variation in Forming of High Strength Steels

Peng Chen, Muammer Koç, Michael L. Wenner

J. Manuf. Sci. Eng. August 2008, 130(4): 041006. doi: https://doi.org/10.1115/1.2951941

Abstract

View articletitled, Experimental Investigation of Springback Variation in Forming of High Strength Steels

Open the PDF for in another window

Topics: Blanks , Friction , High strength steel , Lubricants , Lubrication , Steel , Coatings , Tooling , Materials properties , Design

A Study on Warm Hydroforming of Al and Mg Sheet Materials: Mechanism and Proper Temperature Conditions

Ho Choi, Muammer Koç, Jun Ni

J. Manuf. Sci. Eng. August 2008, 130(4): 041007. doi: https://doi.org/10.1115/1.2951945

Abstract

View articletitled, A Study on Warm Hydroforming of Al and Mg Sheet Materials: Mechanism and Proper Temperature Conditions

Open the PDF for in another window

Topics: Blanks , Finite element analysis , Temperature , Temperature distribution , Corners (Structural elements) , Thermomechanics , Flanges , Simulation

Improving Process Control in Electron Beam Welding Using the Enhanced Modified Faraday Cup

T. A. Palmer, J. W. Elmer

J. Manuf. Sci. Eng. August 2008, 130(4): 041008. doi: https://doi.org/10.1115/1.2950061

Abstract

View articletitled, Improving Process Control in Electron Beam Welding Using the Enhanced Modified Faraday Cup

Open the PDF for in another window

Topics: Electron beam welding , Electron beams , Power density , Process control , Welded joints , Welding , Machinery , Cathode ray oscilloscopes

Engineering-Driven Factor Analysis for Variation Source Identification in Multistage Manufacturing Processes

Jian Liu, Jianjun Shi, S. Jack Hu

J. Manuf. Sci. Eng. August 2008, 130(4): 041009. doi: https://doi.org/10.1115/1.2950064

Abstract

View articletitled, Engineering-Driven Factor Analysis for Variation Source Identification in Multistage Manufacturing Processes

Open the PDF for in another window

Topics: Manufacturing , Rotation , Quality control

Tool Feasibility Analysis for Fixture Assembly Planning

Xiumei Kang, Qingjin Peng

J. Manuf. Sci. Eng. August 2008, 130(4): 041010. doi: https://doi.org/10.1115/1.2952819

Abstract

View articletitled, Tool Feasibility Analysis for Fixture Assembly Planning

Open the PDF for in another window

Topics: Manufacturing , Fasteners

Drawback During Deposition of Overlapping Molten Wax Droplets

Ri Li, Nasser Ashgriz, Sanjeev Chandra, John R. Andrews, James Williams

J. Manuf. Sci. Eng. August 2008, 130(4): 041011. doi: https://doi.org/10.1115/1.2952821

Abstract

View articletitled, Drawback During Deposition of Overlapping Molten Wax Droplets

Open the PDF for in another window

Topics: Drops , Temperature

Identification of Dynamic Parameter of a 3DOF Parallel Manipulator With Actuation Redundancy

Jun Wu, Jinsong Wang, Liping Wang

J. Manuf. Sci. Eng. August 2008, 130(4): 041012. doi: https://doi.org/10.1115/1.2952823

Abstract

View articletitled, Identification of Dynamic Parameter of a 3DOF Parallel Manipulator With Actuation Redundancy

Open the PDF for in another window

Topics: Manipulators , Redundancy (Engineering) , Dynamic models , Virtual work principle , Kinematics , Friction

A Localization Algorithm for Improving Fabrication of Curved Hull Plates in Shipbuilding

Jung Seo Park, Jong Gye Shin, Chung Min Hyun, Young Chil Doh, Kwang Hee Ko

J. Manuf. Sci. Eng. August 2008, 130(4): 041013. doi: https://doi.org/10.1115/1.2953232

Abstract

View articletitled, A Localization Algorithm for Improving Fabrication of Curved Hull Plates in Shipbuilding

Open the PDF for in another window

Topics: Algorithms , Computation , Cutting , Manufacturing , Plates (structures) , Shipbuilding , Hull , Computer-aided design , Shapes

Partial Pore Blocking in Microfiltration Recycling of a Semisynthetic Metalworking Fluid

John E. Wentz, Shiv G. Kapoor, Richard E. DeVor, N. Rajagopalan

J. Manuf. Sci. Eng. August 2008, 130(4): 041014. doi: https://doi.org/10.1115/1.2953234

Abstract

View articletitled, Partial Pore Blocking in Microfiltration Recycling of a Semisynthetic Metalworking Fluid

Open the PDF for in another window

Topics: Membranes , Microfiltration , Particle size , Fluids , Metalworking , Probability , Microemulsions

Simulation of a New Solid State Joining Process Using Single-Shoulder Two-Pin Tool

S. Mukherjee, A. K. Ghosh

J. Manuf. Sci. Eng. August 2008, 130(4): 041015. doi: https://doi.org/10.1115/1.2953071

Abstract

View articletitled, Simulation of a New Solid State Joining Process Using Single-Shoulder Two-Pin Tool

Open the PDF for in another window

Topics: Design , Finite element analysis , Friction , Joining , Pins (Engineering) , Shear (Mechanics) , Simulation , Temperature , Rotation , Shear deformation

Variable Powder Flow Rate Control in Laser Metal Deposition Processes

Lie Tang, Jianzhong Ruan, Robert G. Landers, Frank Liou

J. Manuf. Sci. Eng. August 2008, 130(4): 041016. doi: https://doi.org/10.1115/1.2953074

Abstract

View articletitled, Variable Powder Flow Rate Control in Laser Metal Deposition Processes

Open the PDF for in another window

Topics: Flow (Dynamics) , Lasers , Engines , Motors

Experimental and Numerical Investigations on Microcoining of Stainless Steel 304

Gap-Yong Kim, Muammer Koç, Jun Ni

J. Manuf. Sci. Eng. August 2008, 130(4): 041017. doi: https://doi.org/10.1115/1.2953235

Abstract

View articletitled, Experimental and Numerical Investigations on Microcoining of Stainless Steel 304

Open the PDF for in another window

Topics: Grain size , Stainless steel , Stress , Flow (Dynamics) , Size effect

Technical Briefs

Multiobjective Optimization for Integrated Tolerance Allocation and Fixture Layout Design in Multistation Assembly

Z. Li, L. E. Izquierdo, M. Kokkolaras, S. J. Hu, P. Y. Papalambros

J. Manuf. Sci. Eng. August 2008, 130(4): 044501. doi: https://doi.org/10.1115/1.2951951

Abstract

View articletitled, Multiobjective Optimization for Integrated Tolerance Allocation and Fixture Layout Design in Multistation Assembly

Open the PDF for in another window

Topics: Design , Manufacturing , Pareto optimization , Tradeoffs , Optimization , Vehicles

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Effect of Microgravity on the Metal Droplet Transfer and Bead Characteristics in the Directed Energy Deposition-Arc Process

J. Manuf. Sci. Eng (December 2024)

Reducing Laser Exposure Time of PBF-LB/P by Providing High Energy Without Thermal Degradation and Its Effect on Part Strength and Process Time

J. Manuf. Sci. Eng (January 2025)

Femtosecond Pulsed Laser Machining of Fused Silica for Micro-Cavities With Sharp Corners

J. Manuf. Sci. Eng (January 2025)

Acquired Angle Error Correction Based on Variation of an Angle Detection Signal Intensity in Rotary Encoders

J. Manuf. Sci. Eng (January 2025)

A Simple Approach to Transient-State Modeling of Nitrogen Cooling in the Extrusion of Light-Alloy Complex Profiles

J. Manuf. Sci. Eng (February 2025)

Research Papers

Investigating Reliability of Variable Blank Holder Force Control in Sheet Drawing Under Process Uncertainties

Numerical Simulation of Direct Metal Laser Sintering of Single-Component Powder on Top of Sintered Layers

Development of a Computer Simulation Model for Blowing Glass Containers

Thermal and Structural Deformations During Diamond Turning of Rotationally Symmetric Structured Surfaces

Support Vector Fuzzy Adaptive Network in the Modeling of Material Removal Rate in Rotary Ultrasonic Machining

Experimental Investigation of Springback Variation in Forming of High Strength Steels

A Study on Warm Hydroforming of Al and Mg Sheet Materials: Mechanism and Proper Temperature Conditions

Improving Process Control in Electron Beam Welding Using the Enhanced Modified Faraday Cup

Engineering-Driven Factor Analysis for Variation Source Identification in Multistage Manufacturing Processes

Tool Feasibility Analysis for Fixture Assembly Planning

Drawback During Deposition of Overlapping Molten Wax Droplets

Identification of Dynamic Parameter of a 3DOF Parallel Manipulator With Actuation Redundancy

A Localization Algorithm for Improving Fabrication of Curved Hull Plates in Shipbuilding

Partial Pore Blocking in Microfiltration Recycling of a Semisynthetic Metalworking Fluid

Simulation of a New Solid State Joining Process Using Single-Shoulder Two-Pin Tool

Variable Powder Flow Rate Control in Laser Metal Deposition Processes

Experimental and Numerical Investigations on Microcoining of Stainless Steel 304

Technical Briefs

Multiobjective Optimization for Integrated Tolerance Allocation and Fixture Layout Design in Multistation Assembly

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only