Abstract
This paper presents a review of recent advances in modeling and simulation of conventional metal machining processes, which continue to dominate a significant part of all machining processes, and in recent years, the need for predictive models for machining processes has grown in importance in the digital manufacturing age. Significant advances have been made in modeling the mechanics of cutting in conventional machining, driven by industrial need and enabled by rapid advances in computational power. The paper surveys the state-of-the-art in analytical and numerical modeling of conventional metal machining processes with a focus on their ability to predict useful performance attributes including chip geometry, forces, temperatures, tool wear, residual stress, and microstructure. Also included in the review is a discussion of the industrial use of modeling and simulation tools for conventional machining. Additionally, the practical applicability, implementation benefits, and methodological limitations of conventional machining process modeling have been examined. The paper concludes with a summary of future research directions in modeling and simulation of conventional metal machining processes.
Issue Section:
Review Article
Topics:
Cutting,
Machining,
Modeling,
Simulation,
Stress,
Computer simulation,
Wear,
Temperature,
Shear (Mechanics)
References
1.
Merchant
, M. E.
, 1944
, “Basic Mechanics of the Metal Cutting Process
,” ASME J. Appl. Mech.
, 11
(3
), pp. A168
–A175
. 2.
Jawahir
, I. S.
, and Jayal
, A. D.
, 2011
, “Product and Process Innovation for Modeling of Sustainable Machining Processes,” Advances in Sustainable Manufacturing
, G.
Seliger
, M.
Khraisheh
, and I.
Jawahir
, eds., Springer
, Berlin/Heidelberg
.3.
Jawahir
, I. S.
, Schoop
, J.
, Kaynak
, Y.
, Balaji
, A. K.
, Ghosh
, R.
, and Lu
, T.
, 2020
, “Progress Toward Modeling and Optimization of Sustainable Machining Processes
,” ASME J. Manuf. Sci. Eng.
, 142
(11
), p. 110811
. 4.
Ehmann
, K. F.
, Kapoor
, S. G.
, DeVor
, R. E.
, and Lazoglu
, I.
, 1997
, “Machining Process Modeling: A Review
,” ASME J. Manuf. Sci. Eng.
, 119
(4B
), pp. 655
–663
. 5.
Van Luttervelt
, C. A.
, Childs
, T.
, Jawahir
, I. S.
, Klocke
, F.
, and Venuvinod
, P. K.
, 1998
, “Present Situation and Future Trends in Modeling of Machining Operations Progress Report of the CIRP Working Group ‘Modeling of Machining Operations’
,” CIRP Ann.
, 47
(2
), pp. 587
–626
. 6.
Liu
, X.
, DeVor
, R. E.
, Kapoor
, S. G.
, and Ehmann
, K. F.
, 2004
, “The Mechanics of Machining at the Microscale: Assessment of the Current State of the Science
,” ASME J. Manuf. Sci. Eng.
, 126
(4
), pp. 666
–678
. 7.
Arrazola
, P. J.
, Özel
, T.
, Umbrello
, D.
, Davies
, M.
, and Jawahir
, I. S.
, 2013
, “Recent Advances in Modeling of Metal Machining Processes
,” CIRP Ann.
, 62
(2
), pp. 695
–718
. 8.
Astakhov
, V. P.
, 1999
, Metal Cutting Mechanics
, CRC Press
, Boca Raton
.9.
Lee
, E. H.
, and Shaffer
, B. W.
, 1951
, “The Theory of Plasticity Applied to a Problem of Machining
,” ASME J. Appl. Mech.
, 18
(4
), pp. 405
–413
. 10.
Hill
, R.
, 1950
, The Mathematical Theory of Plasticity
, Oxford University Press
, Oxford, UK
.11.
Hill
, R.
, 1954
, “The Mechanics of Machining: A New Approach
,” J. Mech. Phys. Solids
, 3
(1
), pp. 47
–53
. 12.
Palmer
, W. B.
, and Oxley
, P. L. B.
, 1959
, “Mechanics of Orthogonal Machining
,” Proc. Inst. Mech. Eng.
, 173
(1
), pp. 623
–654
. 13.
Roth
, R. N.
, and Oxley
, P. L. B.
, 1972
, “Slip-Line Field Analysis for Orthogonal Machining Based Upon Experimental Flow Fields
,” J. Mech. Eng. Sci.
, 14
(2
), pp. 85
–97
. 14.
Oxley
, P. L. B.
, and Welsh
, M. J. M.
, 1964
, “Calculating the Shear Angle in Orthogonal Metal Cutting From Fundamental Stress/Strain/Strain-Rate Properties of the Work Material
,” Proceedings of the 4th MTDR Conference
, Manchester, UK
, pp. 1
–9
.15.
Oxley
, P. L. B.
, and Welsh
, M. J. M.
, 1967
, “An Explanation of the Apparent Bridgman Effect in Merchant's Orthogonal Cutting Results
,” ASME J. Eng. Ind.
, 89
(3
), pp. 549
–555
.16.
Oxley
, P. L. B.
, 1989
, The Mechanics of Machining: An Analytical Approach to Assessing Machinability
, Ellis Horwood Limited
, Chichester, England
.17.
Dudzinski
, D.
, and Molinari
, A.
, 1997
, “A Modelling of Cutting for Viscoplastic Materials
,” Int. J. Mech. Sci.
, 39
(4
), pp. 369
–389
. 18.
Moufki
, A.
, Molinari
, A.
, and Dudzinski
, D.
, 1998
, “Modelling of Orthogonal Cutting With a Temperature Dependent Friction Law
,” J. Mech. Phys. Solids
, 46
(10
), pp. 2103
–2138
. 19.
Johnson
, W.
, 1962
, “Some Slip-Line Fields for Swaging or Expanding Indenting, Extruding and Machining for Tools With Curved Dies
,” Int. J. Mech. Sci.
, 4
(4
), pp. 323
–347
. 20.
Usui
, E.
, and Hoshi
, K.
, 1963
, “Slip-Line Fields in Metal Machining Which Involve Centered Fans
,” Proceedings of International Production Engineering Research Conference
, ASME
, Pittsburgh
, PA, pp. 61
–71
.21.
Kudo
, H.
, 1965
, “Some New Slip-Line Solutions for Two-Dimensional Steady-State Machining
,” Int. J. Mech. Sci.
, 7
(1
), pp. 43
–55
. 22.
Dewhurst
, P.
, 1978
, “On the Non-Uniqueness of the Machining Process
,” Proc. R. Soc. London, Ser. A
, 360
(1703
), pp. 587
–610
.23.
Jawahir
, I. S.
, 1986
, “An Experimental and Theoretical Study of the Effects of Tool Restricted Contact on Chip Breaking
,” Ph.D. thesis
, University of New South Wales
, Sydney, Australia
.24.
Shi
, T.
, and Ramalingam
, S.
, 1991
, “Slip-Line Solution for Orthogonal Cutting With a Chip Breaker and Flank Wear
,” Int. J. Mech. Sci.
, 33
(9
), pp. 689
–704
. 25.
Fang
, N.
, Jawahir
, I. S.
, and Oxley
, P. L. B.
, 2001
, “A Universal Slip-Line Model With Non-Unique Solutions for Machining With Curled Chip Formation and a Restricted Contact Tool
,” Int. J. Mech. Sci.
, 43
(2
), pp. 557
–580
. 26.
Fang
, N.
, and Jawahir
, I. S.
, 2002
, “Analytical Predictions and Experimental Validation of Cutting Force Ratio, Chip Thickness, and Chip Back-Flow Angle in Restricted Contact Machining Using the Universal Slip-Line Model
,” Int. J. Mach. Tools Manuf.
, 42
(6
), pp. 681
–694
. 27.
Fang
, N.
, and Jawahir
, I. S.
, 2002
, “An Analytical Predictive Model and Experimental Validation for Machining with Grooved Tools Incorporating the Effects of Strains, Strain-Rates, and Temperatures
,” CIRP Ann.
, 51
(1
), pp. 83
–86
. 28.
Fang
, N.
, and Jawahir
, I. S.
, 2003
, “Analytical Prediction of the Chip Back-Flow Angle in Machining With Restricted Grooved Tools
,” ASME J. Manuf. Sci. Eng.
, 125
(2
), pp. 210
–219
. 29.
Fang
, N.
, 2003
, “Slip-Line Modeling of Machining With a Rounded-Edge Tool-Part I: New Model and Theory
,” J. Mech. Phys. Solids
, 51
(4
), pp. 715
–742
. 30.
Wang
, X.
, 2005
, “Predictive Modeling and Simulation of 3-D Cyclic Chip Formation Process in Dry Machining Operations using Slip-line Models,” Ph.D. Thesis, University of Kentucky
.31.
Karpat
, Y.
, and Özel
, T.
, 2008
, “Analytical and Thermal Modeling of High-Speed Machining With Chamfered Tools
,” ASME J. Manuf. Sci. Eng.
, 130
(1
), p. 011001
. 32.
Ren
, H.
, and Altintas
, Y.
, 2000
, “Mechanics of Machining With Chamfered Tools
,” ASME J. Manuf. Sci. Eng.
, 122
(4
), pp. 650
–659
. 33.
Jin
, X.
, and Altintas
, Y.
, 2011
, “Slip-Line Field Model of Micro-Cutting Process With Round Tool Edge Effect
,” J. Mater. Process. Technol.
, 211
(3
), pp. 339
–355
. 34.
Uysal
, A.
, and Altan
, E.
, 2014
, “Experimental Investigation of a Slip-Line Field Model for a Worn Cutting Tool
,” Proc. Inst. Mech. Eng., Part C
, 228
(8
), pp. 1398
–1404
. 35.
Manyindo
, B. M.
, and Oxley
, P. L. B.
, 1986
, “Modeling the Catastrophic Shear Type of Chip When Machining Stainless Steel
,” Proc. Inst. Mech. Eng., Part C
, 200
(5
), pp. 349
–358
. 36.
Uysal
, A.
, and Jawahir
, I. S.
, 2019
, “A Slip-Line Model for Serrated Chip Formation in Machining of Stainless Steel and Validation
,” Int. J. Adv. Manuf. Technol.
, 101
(9–12
), pp. 2449
–2464
. 37.
Uysal
, A.
, and Jawahir
, I. S.
, 2019
, “Validation of the Slip-Line Model for Serrated Chip Formation in Orthogonal Turning Under Dry and MQL Conditions
,” Proc. CIRP
, 82
, pp. 124
–129
. 38.
Shi
, B.
, Attia
, H.
, and Tounsi
, N.
, 2010
, “Identification of Material Constitutive Laws for Machining—Part I: An Analytical Model Describing the Stress, Strain, Strain rate, and Temperature Fields in the Primary Shear Zone in Orthogonal Metal Cutting
,” ASME J. Manuf. Sci. Eng.
, 132
(5
), p. 051009
. 39.
Young
, H.
, Mathew
, P.
, and Oxley
, P. L. B.
, 1994
, “Predicting Cutting Forces in Face Milling
,” Int. J. Mach. Tools Manuf.
, 34
(6
), pp. 771
–783
. 40.
Li
, X. P.
, Nee
, A. Y. C.
, Wong
, Y. S.
, and Zheng
, H. Q.
, 1999
, “Theoretical Modeling and Simulation of Milling Forces
,” J. Mater. Process. Technol.
, 89–90
, pp. 266
–272
.41.
Li
, H. Z.
, Zhang
, W. B.
, and Li
, X. P.
, 2001
, “Modeling of Cutting Forces in Helical End Milling Using a Predictive Machining Theory
,” Int. J. Mech. Sci.
, 43
(8
), pp. 1711
–1730
. 42.
Moufki
, A.
, Dudzinski
, D.
, Molinari
, A.
, and Rausch
, M.
, 2000
, “Thermoviscoplastic Modelling of Oblique Cutting: Forces and Chip Flow Predictions
,” Int. J. Mech. Sci.
, 42
(6
), pp. 1205
–1232
. 43.
Moufki
, A.
, Devillez
, A.
, Dudzinski
, D.
, and Molinari
, A.
, 2004
, “Thermomechanical Modelling of Oblique Cutting and Experimental Validation
,” Int. J. Mach. Tools Manuf.
, 44
(9
), pp. 971
–989
. 44.
Moufki
, A.
, Dudzinski
, D.
, and Le Coz
, G.
, 2015
, “Prediction of Cutting Forces From an Analytical Model of Oblique Cutting, Application to Peripheral Milling of Ti-6Al-4V Alloy
,” Int. J. Adv. Manuf. Technol.
, 81
(1–4
), pp. 615
–626
. 45.
Field
, M.
, and Kahles
, J. F.
, 1971
, “Review of Surface Integrity of Machined Components
,” CIRP Ann.
, 20
(2
), pp. 153
–163
.46.
Jacobus
, K.
, DeVor
, R. E.
, and Kapoor
, S. G.
, 2000
, “Machining-Induced Residual Stress: Experimentation and Modeling
,” ASME J. Manuf. Sci. Eng.
, 122
(1
), pp. 20
–31
. 47.
Lazoglu
, I.
, Ulutan
, D.
, Alaca
, B. E.
, and Engin
, S.
, 2008
, “An Enhanced Analytical Model for Residual Stress Prediction in Machining
,” CIRP Ann.
, 57
(1
), pp. 81
–84
. 48.
Liang
, S. Y.
, and Su
, J. C.
, 2007
, “Residual Stress Modeling in Orthogonal Machining
,” CIRP Ann.
, 56
(1
), pp. 65
–68
. 49.
Su
, J. C.
, Young
, K. A.
, Ma
, K.
, Srivatsa
, S.
, Morehouse
, J. B.
, and Liang
, S. Y.
, 2013
, “Modeling of Residual Stresses in Milling
,” Int. J. Adv. Manuf. Technol.
, 65
(5–8
), pp. 717
–733
.50.
Fergani
, O.
, Jiang
, X.
, Shao
, Y.
, Welo
, T.
, Yang
, J.
, and Liang
, S. Y.
, 2016
, “Prediction of Residual Stress Regeneration in Multi-Pass Milling
,” Int. J. Adv. Manuf. Technol.
, 83
(5–8
), pp. 1153
–1160
. 51.
Liang
, X.
, Liu
, Z.
, Wang
, B.
, and Hou
, X.
, 2018
, “Modeling of Plastic Deformation Induced by Thermo-Mechanical Stresses Considering Tool Flank Wear in High-Speed Machining Ti-6Al-4V
,” Int. J. Mech. Sci.
, 140
, pp. 1
–12
. 52.
Mirkoohi
, E.
, Bocchini
, P.
, and Liang
, S. Y.
, 2019
, “Inverse Analysis of Residual Stress in Orthogonal Cutting
,” J. Manuf. Process.
, 38
, pp. 462
–471
. 53.
Denkena
, B.
, Grove
, T.
, Dittrich
, M. A.
, Niederwestberg
, D.
, and Lahres
, M.
, 2015
, “Inverse Determination of Constitutive Equations and Cutting Force Modeling for Complex Tools Using Oxley's Predictive Machining Theory
,” Proc. CIRP
, 31
, pp. 405
–410
. 54.
Mirkoohi
, E.
, Bocchini
, P.
, and Liang
, S. Y.
, 2018
, “An Analytical Modeling for Process Parameter Planning in the Machining of Ti-6Al-4V for Force Specifications Using an Inverse Analysis
,” Int. J. Adv. Manuf. Technol.
, 98
(9–12
), pp. 2347
–2355
. 55.
Mirkoohi
, E.
, Bocchini
, P.
, and Liang
, S. Y.
, 2019
, “Analytical Temperature Predictive Modeling and Non-Linear Optimization in Machining
,” Int. J. Adv. Manuf. Technol.
, 102
(5–8
), pp. 1557
–1566
. 56.
Ji
, X.
, Zhang
, X.
, and Liang
, S. Y.
, 2014
, “Predictive Modeling of Residual Stress in Minimum Quantity Lubrication Machining
,” Int. J. Adv. Manuf. Technol.
, 70
(9–12
), pp. 2159
–2168
. 57.
Li
, B.
, Jiang
, X.
, Yang
, J.
, and Liang
, S. Y.
, 2015
, “Effects of Depth of Cut on the Redistribution of Residual Stress and Distortion During the Milling of Thin-Walled Part
,” J. Mater. Process. Technol.
, 216
, pp. 223
–233
. 58.
Chou
, Y. K.
, and Evans
, C. J.
, 1997
, “Tool Wear Mechanism in Continuous Cutting of Hardened Tool Steels
,” Wear
, 212
(1
), pp. 59
–65
. 59.
Usui
, E.
, Shirakashi
, T.
, and Kitagawa
, T.
, 1978
, “Analytical Prediction of Three Dimensional Cutting Process-Part 3: Cutting Temperature and Crater Wear of Carbide Tool
,” 100
(6
), pp. 236
–243
.60.
Takeyama
, H.
, and Murata
, R.
, 1963
, “Basic Investigation of Tool Wear
,” ASME J. Eng. Ind.
, 85
(1
), pp. 33
–37
. 61.
Kannatey-Asibu
, E.
, 1985
, “A Transport-Diffusion Equation in Metal Cutting and Its Application to Analysis of the Rate of Flank Wear
,” ASME J. Eng. Ind.
, 107
(1
), pp. 81
–89
. 62.
Molinari
, A.
, and Nouari
, M.
, 2002
, “Modeling of Tool Wear by Diffusion in Metal Cutting
,” Wear
, 252
(1–2
), pp. 135
–149
. 63.
Hua
, J.
, and Shivpuri
, R.
, 2005
, “A Cobalt Diffusion Based Model for Predicting Crater Wear of Carbide Tools in Machining Titanium Alloy
,” ASME J. Eng. Mater. Technol.
, 127
(1
), pp. 136
–144
. 64.
Bahi
, S.
, Nouari
, M.
, Moufki
, A.
, El Mansori
, M.
, and Molinari
, A.
, 2012
, “Hybrid Modelling of Sliding-Sticking Zones at the Tool-Chip Interface Under Dry Machining and Tool Wear Analysis
,” Wear
, 286–287
, pp. 45
–54
. 65.
Huang
, Y.
, and Liang
, S. Y.
, 2004
, “Modeling of CBN Tool Flank Wear Progression in Finish Hard Turning
,” ASME J. Manuf. Sci. Eng.
, 126
(1
), pp. 98
–106
. 66.
Giménez
, S.
, Van der Biest
, O.
, and Vleugels
, J.
, 2007
, “The Role of Chemical Wear in Machining Iron Based Materials by PCD and PCBN Super-Hard Tool Materials
,” Diam. Relat. Mater.
, 16
(3
), pp. 435
–445
. 67.
Shimada
, S.
, Tanaka
, H.
, Higuchi
, M.
, Yamaguchi
, T.
, Honda
, S.
, and Obata
, K.
, 2004
, “Thermo-Chemical Wear Mechanism of Diamond Tool in Machining of Ferrous Metals
,” CIRP Ann.
, 53
(1
), pp. 57
–60
. 68.
Zou
, L.
, Yin
, J.
, Huang
, Y.
, and Zhou
, M.
, 2018
, “Essential Causes for Tool Wear of Single Crystal Diamond in Ultra-Precision Cutting of Ferrous Metals
,” Diam. Relat. Mater.
, 86
, pp. 29
–40
. 69.
Malakizadi
, A.
, Shi
, B.
, Hoier
, P.
, Attia
, H.
, and Krajnik
, P.
, 2020
, “Physics-Based Approach for Predicting Dissolution-Diffusion Tool Wear in Machining
,” CIRP Ann.
, 69
(1
), pp. 81
–84
. 70.
Wang
, J.
, Yan
, J.
, Li
, C.
, Gao
, R. X.
, and Zhao
, R.
, 2019
, “Deep Heterogeneous GRU Model for Predictive Analytics in Smart Manufacturing: Application to Tool Wear Prediction
,” Comput. Ind.
, 111
, pp. 1
–14
. 71.
Wang
, J.
, Li
, Y.
, Zhao
, R.
, and Gao
, R. X.
, 2020
, “Physics Guided Neural Network for Machining Tool Wear Prediction
,” J. Manuf. Syst.
, 57
, pp. 298
–310
. 72.
Kapoor
, S. G.
, DeVor
, R. E.
, Zhu
, R.
, Gajjela
, R.
, Parakkal
, G.
, and Smithey
, D.
, 1998
, “Development of Mechanistic Models for the Prediction of Machining Performance: Model Building Methodology
,” Mach. Sci. Technol.
, 2
(2
), pp. 213
–238
. 73.
Altintaş
, Y.
, and Budak
, E.
, 1995
, “Analytical Prediction of Stability Lobes in Milling
,” CIRP Ann.
, 44
(1
), pp. 357
–362
. 74.
Park
, S. S.
, and Malekian
, M.
, 2009
, “Mechanistic Modeling and Accurate Measurement of Micro End Milling Forces
,” CIRP Ann.
, 58
(1
), pp. 49
–52
. 75.
Jun
, M. B.
, Goo
, C.
, Malekian
, M.
, and Park
, S.
, 2012
, “A New Mechanistic Approach for Micro End Milling Force Modeling
,” ASME J. Manuf. Sci. Eng.
, 134
(1
), p. 011006
. 76.
Tuysuz
, O.
, Altintas
, Y.
, and Feng
, H.-Y.
, 2013
, “Prediction of Cutting Forces in Three and Five-Axis Ball-End Milling With Tool Indentation Effect
,” Int. J. Mach. Tools Manuf.
, 66
, pp. 66
–81
. 77.
Erkorkmaz
, K.
, Katz
, A.
, Hosseinkhani
, Y.
, Plakhotnik
, D.
, Stautner
, M.
, and Ismail
, F.
, 2016
, “Chip Geometry and Cutting Forces in Gear Shaping
,” CIRP Ann.
, 65
(1
), pp. 133
–136
. 78.
Khoshdarregi
, M. R.
, and Altintas
, Y.
, 2015
, “Generalized Modeling of Chip Geometry and Cutting Forces in Multi-Point Thread Turning
,” Int. J. Mach. Tools Manuf.
, 98
, pp. 21
–32
. 79.
Wan
, M.
, and Altintas
, Y.
, 2014
, “Mechanics and Dynamics of Thread Milling Process
,” Int. J. Mach. Tools Manuf.
, 87
, pp. 16
–26
. 80.
Comak
, A.
, and Altintas
, Y.
, 2017
, “Mechanics of Turn-Milling Operations
,” Int. J. Mach. Tools Manuf.
, 121
, pp. 2
–9
. 81.
Kilic
, Z. M.
, and Altintas
, Y.
, 2016
, “Generalized Mechanics and Dynamics of Metal Cutting Operations for Unified Simulations
,” Int. J. Mach. Tools Manuf.
, 104
, pp. 1
–13
. 82.
Kilic
, Z. M.
, and Altintas
, Y.
, 2016
, “Generalized Modeling of Cutting Tool Geometries for Unified Process Simulation
,” Int. J. Mach. Tools Manuf.
, 104
, pp. 14
–25
. 83.
Chandrasekharan
, V.
, Kapoor
, S. G.
, and DeVor
, R. E.
, 1995
, “A Mechanistic Approach to Predicting the Cutting Forces in Drilling: With Application to Fiber-Reinforced Composite Materials
,” ASME J. Eng. Ind.
, 117
(4
), pp. 559
–570
. 84.
Wang
, J. J.
, Book
, W.
, and Liang
, S. Y.
, 1994
, “Convolution Analysis of Milling Force Pulsation
,” ASME J. Eng. Ind.
, 116
(1
), pp. 17
–25
. 85.
Chiou
, Y. S.
, Zheng
, L.
, and Liang
, S. Y.
, 1996
, “Three Dimensional Cutting Force Analysis in End Milling
,” Int. J. Mech. Sci.
, 38
(3
), pp. 259
–269
. 86.
Zheng
, L.
, Li
, Y.
, and Liang
, S. Y.
, 1997
, “A Generalised Model of Milling Forces
,” Int. J. Adv. Manuf. Technol.
, 14
(3
), pp. 160
–171
. 87.
Zheng
, L.
, and Liang
, S. Y.
, 1997
, “Identification of Cutter Axis Tilt in End Milling
,” ASME J. Eng. Ind.
, 119
(2
), pp. 178
–185
.88.
Wang
, J. J.
, and Liang
, S. Y.
, 1996
, “Chip Load Kinematics in Milling With Radial Cutter Runout
,” ASME J. Eng. Ind.
, 118
(1
), pp. 111
–116
. 89.
Wang
, J. J.
, and Liang
, S. Y.
, 1994
, “Milling Force Convolution Modeling for Identification of Cutter Axis Offset
,” Int. J. Mach. Tools Manuf.
, 34
(8
), pp. 1177
–1190
. 90.
Wang
, J. J.
, Herman
, P. A.
, and Liang
, S. Y.
, 1993
, “Surface Finish Enhancement in Milling via Inverse Runout Trajectory Following of Workpiece
,” Trans. NAMRI, SME
, pp. 103
–109
.91.
Liang
, S. Y.
, and Zheng
, L.
, 1998
, “End Milling System Compliance and Machining Error
,” Mach. Sci. Technol.
, 2
(1
), pp. 41
–56
. 92.
Su
, J. C.
, Young
, K. A.
, Ma
, K.
, Srivasta
, S.
, Morehouse
, J. B.
, and Liang
, S. Y.
, III, 2013
, “Modeling of Residual Stresses in Milling
,” Int. J. Adv. Manuf. Technol.
, 65
(5
), pp. 717
–733
.93.
Strenkowski
, J. S.
, and Carroll
, J. T.
, III, 1985
, “A Finite Element Model of Orthogonal Metal Cutting
,” ASME J. Eng. Ind.
, 107
(4
), pp. 349
–354
. 94.
Komvopoulos
, K.
, and Erpenbeck
, S. A.
, 1991
, “Finite Element Modeling of Orthogonal Metal Cutting
,” ASME J. Eng. Ind.
, 113
(3
), pp. 253
–267
. 95.
Shih
, A. J.
, and Yang
, H. T. Y.
, 1993
, “Experimental and Finite Element Predictions of Residual Stresses Due to Orthogonal Metal Cutting
,” Int. J. Num. Methods Eng.
, 36
(9
), pp. 1487
–1507
. 96.
Marusich
, T. D.
, and Ortiz
, M.
, 1995
, “Modeling and Simulation of High-Speed Machining
,” Int. J. Numer. Meth. Eng.
, 38
(21
), pp. 3675
–3694
. 97.
Obikawa
, T.
, and Usui
, E.
, 1996
, “Computational Machining of Titanium Alloy-Finite Element Modeling and a Few Results
,” ASME J. Manuf. Sci. Eng.
, 118
(2
), pp. 208
–215
. 98.
Ceretti
, E.
, Fallböhmer
, P.
, Wu
, W. T.
, and Altan
, T.
, 1996
, “Application of 2D FEM to Chip Formation in Orthogonal Cutting
,” J. Mater. Process. Technol.
, 59
(1–2
), pp. 169
–180
. 99.
Ceretti
, E.
, Lazzaroni
, C.
, Menegardo
, L.
, and Altan
, T.
, 2000
, “Turning Simulations Using a Three-Dimensional FEM Code
,” J. Mater. Process. Technol.
, 98
(1
), pp. 99
–103
. 100.
Madhavan
, V.
, Chandrasekar
, S.
, and Farris
, T. N.
, 2000
, “Machining as a Wedge Indentation
,” ASME J. Appl. Mech.
, 67
(1
), pp. 128
–139
. 101.
Dirikolu
, M. H.
, Childs
, T. H. C.
, and Maekawa
, K.
, 2001
, “Finite Element Simulation of Chip Flow in Metal Machining
,” Int. J. Mech. Sci.
, 43
(11
), pp. 2699
–2713
. 102.
Abouridouane
, M.
, Klocke
, F.
, Lung
, D.
, and Adams
, O.
, 2012
, “A New 3D Multiphase FE Model for Micro Cutting Ferritic-Pearlitic Carbon Steels
,” CIRP Ann.
, 61
(1
), pp. 71
–74
. 103.
Chuzhoy
, L.
, DeVor
, R. E.
, Kapoor
, S. G.
, Beaudoin
, A. J.
, and Bammann
, D. J.
, 2003
, “Machining Simulation of Ductile Iron and Its Constituents, Part 1: Estimation of Material Model Parameters and Their Validation
,” ASME J. Manuf. Sci. Eng.
, 125
(2
), pp. 181
–191
. 104.
Caruso
, S.
, Di Renzo
, S.
, Dillon
, O. W.
, Umbrello
, D.
, Jayal
, A. D.
, and Jawahir
, I. S.
, 2011
, “Finite Element Modeling of Microstructural Changes in Hard Turning of AISI 52100 Steel
,” Adv. Mat. Res.
, 223
, pp. 960
–969
.105.
Outeiro
, J. C.
, Umbrello
, D.
, and M’saoubi
, R.
, 2006
, “Experimental and Numerical Modeling of the Residual Stresses Induced in Orthogonal Cutting of AISI 316L Steel
,” Int. J. Mach. Tools Manuf.
, 46
(14
), pp. 1786
–1794
. 106.
Mondelin
, A.
, Valiorgue
, F.
, Rech
, J.
, Coret
, M.
, and Feulvarch
, E.
, 2012
, “Hybrid Model for the Prediction of Residual Stresses Induced by 15–5PH Steel Turning
,” Int. J. Mech. Sci.
, 58
(1
), pp. 69
–85
. 107.
Baeker
, M.
, Roesler
, J.
, and Siemers
, C.
, 2002
, “Finite Element Simulation of Segmented Chip Formation of Ti6Al4V
,” ASME J. Manuf. Sci. Eng.
, 124
(2
), pp. 485
–488
. 108.
Calamaz
, M.
, Coupard
, D.
, and Girot
, F.
, 2008
, “A New Material Model for 2D Numerical Simulation of Serrated Chip Formation When Machining Titanium Alloy Ti-6Al-4V
,” Int. J. Mach. Tools Manuf.
, 48
(3–4
), pp. 275
–288
. 109.
Özel
, T.
, Sima
, M.
, Srivastava
, A. K.
, and Kaftanoglu
, B.
, 2010
, “Investigations on the Effects of Multi-Layered Coated Inserts in Machining Ti-6Al-4V Alloy With Experiments and Finite Element Simulations
,” CIRP Ann.
, 59
(2
), pp. 77
–82
. 110.
Lorentzon
, J.
, Järvstråt
, N.
, and Josefson
, B. L.
, 2009
, “Modeling Chip Formation of Alloy 718
,” J. Mater. Process. Technol.
, 209
(10
), pp. 4645
–4653
. 111.
Özel
, T.
, Llanos
, I.
, Soriano
, J.
, and Arrazola
, P. J.
, 2011
, “3D Finite Element Modeling of Chip Formation Process for Machining Inconel 718: Comparison of FE Software Predictions
,” Mach. Sci. Technol.
, 15
(1
), pp. 21
–46
. 112.
Arrazola
, P. J.
, and Özel
, T.
, 2010
, “Investigations on the Effects of Friction Modeling in Finite Element Simulation of Machining
,” Int. J. Mech. Sci.
, 52
(1
), pp. 31
–42
. 113.
Abushawashi
, Y.
, Xiao
, X.
, and Astakhov
, V. P.
, 2017
, “Practical Applications of the “Energy–Triaxiality” State Relationship in Metal Cutting
,” Mach. Sci. Technol.
, 21
(1
), pp. 1
–18
. 114.
Wang
, B.
, Xiao
, X.
, Astakhov
, V. P.
, and Liu
, Z.
, 2019
, “The Effects of Stress Triaxiality and Strain Rate on the Fracture Strain of Ti6Al4V
,” Eng. Fract. Mech.
, 219
, p. 106627
. 115.
Vandana
, A. S.
, and Sundaram
, N. K.
, 2018
, “Simulation of Sinuous Flow in Metal Cutting
,” Tribol. Lett.
, 66
(3
), p. 94
. 116.
Wang
, B.
, and Liu
, Z.
, 2016
, “Evaluation on Fracture Locus of Serrated Chip Generation With Stress Triaxiality in High Speed Machining of Ti6Al4V
,” Mater. Des.
, 98
, pp. 68
–78
. 117.
Ducobu
, F.
, Rivière-Lorphèvre
, E.
, and Filippi
, E.
, 2014
, “Numerical Contribution to the Comprehension of Saw-Toothed Ti6Al4V Chip Formation in Orthogonal Cutting
,” Int. J. Mech. Sci.
, 81
, pp. 77
–87
. 118.
Zhang
, X.
, Shivpuri
, R.
, and Srivastava
, A. K.
, 2016
, “Chip Fracture Behavior in the High Speed Machining of Titanium Alloys
,” ASME J. Manuf. Sci. Eng.
, 138
(8
), p. 081001
. 119.
Wang
, B.
, and Liu
, Z.
, 2015
, “Shear Localization Sensitivity Analysis for Johnson-Cook Constitutive Parameters on Serrated Chips in High Speed Machining of Ti6Al4V
,” Simul. Model. Pract. Th.
, 55
, pp. 63
–76
. 120.
Childs
, T. H. C.
, Arrazola
, P. J.
, Aristimuno
, P.
, Garay
, A.
, and Sacristan
, I.
, 2018
, “Ti6Al4V Metal Cutting Chip Formation Experiments and Modeling Over a Wide Range of Cutting Speeds
,” J. Mater. Process. Technol.
, 255
, pp. 898
–913
. 121.
Rodríguez
, J. M.
, Carbonell
, J. M.
, and Jonsén
, P.
, 2020
, “Numerical Methods for the Modeling of Chip Formation
,” Arch. Comput. Meth. Eng.
, 27
(2
), pp. 387
–412
. 122.
Limido
, J.
, Espinosa
, C.
, Salaün
, M.
, and Lacome
, J. L.
, 2007
, “SPH Method Applied to High Speed Cutting Modeling
,” Int. J. Mech. Sci.
, 49
(7
), pp. 898
–908
. 123.
Calamaz
, M.
, Limido
, J.
, Nouari
, M.
, Espinosa
, C.
, Coupard
, D.
, Salaün
, M.
, Girot
, F.
, and Chieragatti
, R.
, 2009
, “Toward a Better Understanding of Tool Wear Effect Through a Comparison Between Experiments and SPH Numerical Modeling of Machining Hard Materials
,” Int. J. Refract. Met. Hard Mater.
, 27
(3
), pp. 595
–604
. 124.
Xi
, Y.
, Bermingham
, M.
, Wang
, G.
, and Dargusch
, M.
, 2014
, “SPH/FE Modeling of Cutting Force and Chip Formation During Thermally Assisted Machining of Ti6Al4V Alloy
,” Comput. Mater. Sci.
, 84
, pp. 188
–197
. 125.
Ojal
, N.
, Cherukuri
, H. P.
, Schmitz
, T. L.
, and Jaycox
, A. W.
, 2020
, “A Comparison of Smoothed Particle Hydrodynamics (SPH) and Coupled SPH-FEM Methods for Modeling Machining
,” Proceeding of ASME International Mech. Eng. Cong. Expos.
, Paper No. 84485, p. VA02AT02A036
.126.
Uhlmann
, E.
, Gerstenberger
, R.
, Graf von der Schulenburg
, M.
, Kuhnert
, J.
, and Mattes
, A.
, 2009
, “The Finite-Pointset-Method for the Meshfree Numerical Simulation
of
Chip Formation
,” Proceedings of the 12th CIRP Conference on Modelleing of Machine Operations
, San Sebastian, Spain
, May 7–8
, Vol. 1
, pp. 145
–151
.127.
Uhlmann
, E.
, Gerstenberger
, R.
, and Kuhnert
, J.
, 2013
, “Cutting Simulation With the Meshfree Finite Pointset Method
,” Proc. CIRP
, 8
, pp. 391
–396
. 128.
Illoul
, L.
, and Lorong
, P.
, 2011
, “On Some Aspects of the CNEM Implementation in 3D in Order to Simulate High Speed Machining or Shearing
,” Comput. Struct.
, 89
(11–12
), pp. 940
–958
. 129.
He
, Y.
, Zhang
, J.
, Qi
, Y.
, Liu
, H.
, Memon
, A. R.
, Zhao
, and W.
, 2017
, “Numerical Study of Microstructural Effects on Chip Formation in High Speed Cutting of Ductile Iron with Discrete Element Method
,” J. Mater. Proc. Technol.
, 249
, pp. 291
–301
.130.
Belak
, J.
, and Stowers
, I.
, 1990
, “A Molecular Dynamics Model of the Orthogonal Cutting Process
, American Society of Photoptical Engineers (ASPE) Annual Conference,” Rochester, NY, Sept. 23–28.131.
Komanduri
, R.
, and Raff
, L.
, 2001
, “A Review on the Molecular Dynamics Simulation of Machining at the Atomic Scale
,” Proc. Inst. Mech. Eng., Part B
, 215
(12
), pp. 1639
–1672
. 132.
Cai
, M. B.
, Li
, X. P.
, and Rahman
, M.
, 2007
, “Study of the Mechanism of Nanoscale Ductile Mode Cutting of Silicon using Molecular Dynamics Simulation
,” Int. J. Mach. Tools Manuf.
, 47
(1
), pp. 75
–80
. 133.
Chandrasekaran
, N.
, Khajavi
, A. N.
, Raff
, L.
, and Komanduri
, R.
, 1998
, “A New Method for Molecular Dynamics Simulation of Nanometric Cutting
,” Philos. Mag. B
, 77
(1
), pp. 7
–26
. 134.
Narulkar
, R.
, Bukkapatnam
, S.
, Raff
, L.
, and Komanduri
, R.
, 2009
, “Graphitization as a Precursor to Wear of Diamond in Machining Pure Iron: A Molecular Dynamics Investigation
,” Comput. Mater. Sci.
, 45
(2
), pp. 358
–366
. 135.
Komanduri
, R.
, Chandrasekaran
, N.
, and Raff
, L.
, 2000
, “MD Simulation of Nanometric Cutting of Single Crystal Aluminum-Effect of Crystal Orientation and Direction of Cutting
,” Wear
, 242
(1–2
), pp. 60
–88
. 136.
Komanduri
, R.
, Chandrasekaran
, N.
, and Raff
, L.
, 2001
, “Molecular Dynamics Simulation of the Nanometric Cutting of Silicon
,” Philos. Mag. B
, 81
(12
), pp. 1989
–2019
. 137.
Özel
, T.
, and Altan
, T.
, 2000
, “Determination of Workpiece Flow Stress and Friction at the Chip-Tool Contact for High Speed Cutting
,” Int. J. Mach. Tools Manuf.
, 40
(1
), pp. 133
–152
. 138.
Melkote
, S. N.
, Grzesik
, W.
, Outeiro
, J.
, Rech
, J.
, Schulze
, V.
, Attia
, H.
, Arrazola
, P. J.
, M’Saoubi
, R.
, and Saldana
, C.
, 2017
, “Advances in Material and Friction Data for Modeling of Metal Machining
,” CIRP Ann.
, 66
(2
), pp. 779
–802
. 139.
Wang
, B.
, Liu
, Z.
, Su
, G.
, and Ai
, X.
, 2015
, “Brittle Removal Mechanism of Ductile Materials with Ultrahigh-Speed Machining
,” ASME J. Manuf. Sci. Eng.
, 137
(6
), p. 061002
. 140.
Fernandez-Zelaia
, P.
, Joseph
, V. R.
, Kalidindi
, S. R.
, and Melkote
, S. N.
, 2018
, “Estimating Mechanical Properties From Spherical Indentation Using Bayesian Approaches
,” Mater. Des.
, 147
, pp. 92
–105
. 141.
Fernandez-Zelaia
, P.
, and Melkote
, S. N.
, 2019
, “Statistical Calibration and Uncertainty Quantification of Complex Machining Computer Models
,” Int. J. Mach. Tools Manuf.
, 136
, pp. 45
–61
. 142.
Sung
, J. H.
, Kim
, J. H.
, and Wagoner
, R. H.
, 2010
, “A Plastic Constitutive Equation Incorporating Strain, Strain-Rate, and Temperature
,” Int. J. Plast.
, 26
(12
), pp. 1746
–1771
. 143.
Johnson
, G. R.
, and Cook
, W. H.
, 1983
, “A Constitutive Model and Data
for
Metals Subjected to Large Strains, High Strain Rates and High Temperatures
,” Proceedings of 7th International Symposium on Ballistics
, Hague, The Netherlands
, pp. 541
–547
.144.
Johnson
, G. R.
, and Cook
, W. H.
, 1985
, “Fracture Characteristics of Three Metals Subjected to Various Strains, Strain Rates, Temperatures and Pressures
,” Eng. Fract. Mech.
, 21
(1
), pp. 31
–48
. 145.
Svoboda
, A.
, Wedberg
, D.
, and Lindgren
, L. E.
, 2010
, “Simulation of Metal Cutting Using a Physically Based Plasticity Model
,” Model. Simul. Mater. Sci. Eng.
, 18
(7
), p. 075005
. 146.
Liu
, R.
, Melkote
, S. N.
, Pucha
, R.
, Morehouse
, J.
, Man
, X.
, and Marusich
, T.
, 2013
, “An Enhanced Constitutive Material Model for Machining of Ti-6Al-4V Alloy
,” J. Mater. Process. Technol.
, 213
(12
), pp. 2238
–2246
. 147.
Liu
, R.
, Salahshoor
, M.
, Melkote
, S. N.
, and Marusich
, T.
, 2014
, “The Prediction of Machined Surface Hardness Using a New Physics-Based Material Model
,” Proc. CIRP
, 13
, pp. 249
–256
. 148.
Fernandez-Zelaia
, P.
, Melkote
, S. N.
, Marusich
, T.
, and Usui
, S.
, 2017
, “A Microstructure Sensitive Grain Boundary Sliding and Slip Based Constitutive Model for Machining of Ti-6Al-4V
,” Mech. Mater.
, 109
, pp. 67
–81
. 149.
Wang
, Q.
, and Liu
, Z.
, 2018
, “Microhardness Prediction Based on a Microstructure-Sensitive Flow Stress Model During High Speed Machining Ti-6Al-4V
,” ASME J. Manuf. Sci. Eng.
, 140
(9
), p. 091003
. 150.
Cheng
, W.
, Outeiro
, J.
, Costes
, J. P.
, M'Saoubi
, R.
, Karaouni
, H.
, and Astakhov
, V. P.
, 2019
, “A Constitutive Model for Ti6Al4V Considering the State of Stress and Strain Rate Effects
,” Mech. Mater.
, 137
, p. 103103
. 151.
Zorev
, N. N.
, 1963
, “Interrelationship Between Shear Processes Occurring Along Tool Face and on Shear Plane in Metal Cutting
,” Int. Res. Prod. Eng. ASME
, pp. 42
–49
.152.
Usui
, E.
, and Shirakashi
, T.
, 1982
, “Mechanics of Machining-From Descriptive to Predictive Theory
,” On the Art of Cutting Metals-75 Years Later
, ASME Publication PED
, Vol. 7
, pp. 13
–35
.153.
Jawahir
, I. S.
, Brinksmeier
, E.
, M'Saoubi
, R.
, Aspinwall
, D. K.
, Outeiro
, J. C.
, Meyer
, D.
, Umbrello
, D.
, and Jayal
, A. D.
, 2011
, “Surface Integrity in Material Removal Processes: Recent Advances
,” CIRP Ann.
, 60
(2
), pp. 603
–626
. 154.
Shih
, A. J.
, 1995
, “Finite Element Simulation of Orthogonal Metal Cutting
,” ASME J. Eng. Ind.
, 117
(1
), pp. 84
–93
. 155.
Shih
, A. J.
, 1995
, “Finite Element Analysis of the Rake Angle Effects in Orthogonal Metal Cutting
,” Int. J. Mech. Sci.
, 38
(1
), pp. 1
–17
. 156.
Guo
, Y. B.
, Anurag
, S.
, and Jawahir
, I. S.
, 2009
, “A Novel Hybrid Predictive Model and Validation of Unique Hook-Shaped Residual Stress Profiles in Hard Turning
,” CIRP Ann.
, 58
(1
), pp. 81
–84
. 157.
Miguélez
, M. H.
, Zaera
, R.
, Molinari
, A.
, Cheriguene
, R.
, and Rusinek
, A.
, 2009
, “Residual Stresses in Orthogonal Cutting of Metals: The Effect of Thermo Mechanical Coupling Parameters and of Friction
,” J. Therm. Stress.
, 32
(3
), pp. 269
–289
. 158.
Özel
, T.
, and Ulutan
, D.
, 2012
, “Prediction of Machining Induced Residual Stresses in Turning of Titanium and Nickel Based Alloys With Experiments and Finite Element Simulations
,” CIRP Ann.
, 61
(1
), pp. 547
–550
. 159.
Wang
, F.
, Liu
, Z. Y.
, Guo
, Y. B.
, Zhao
, J.
, and Liu
, Z. Q.
, 2017
, “Efficient Multiscale Modeling and Validation of Residual Stress Field in Cutting
,” ASME J. Manuf. Sci. Eng.
, 139
(9
), p. 091004
. 160.
Valiorgue
, F.
, Rech
, J.
, Hamdi
, H.
, Gilles
, P.
, and Bergheau
, J. M.
, 2012
, “3D Modeling of Residual Stresses Induced in Finish Turning of an AISI 304L Stainless Steel
,” Int. J. Mach. Tools Manuf.
, 53
(1
), pp. 77
–90
. 161.
Arısoy
, Y. M.
, and Özel
, T.
, 2015
, “Prediction of Machining Induced Microstructure in Ti-6Al-4V Alloy Using 3-D FE-Based Simulations: Effects of Tool Micro-Geometry, Coating and Cutting Conditions
,” J. Mater. Process. Technol.
, 220
, pp. 1
–26
. 162.
Yang
, D.
, Liu
, Z.
, Ren
, X.
, and Zhuang
, P.
, 2016
, “Hybrid Modeling With Finite Element and Statistical Methods for Residual Stress Prediction in Peripheral Milling of Titanium Alloy Ti-6Al-4V
,” Int. J. Mech. Sci.
, 108–109
, pp. 29
–38
. 163.
Schulze
, V.
, Autenrieth
, H.
, Deuchert
, M.
, and Weule
, H.
, 2010
, “Investigation of Surface Near Residual Stress States After Micro-Cutting by Finite Element Simulation
,” CIRP Ann.
, 59
(1
), pp. 117
–120
. 164.
Simoneau
, A.
, Ng
, E.
, and Elbestawi
, M. A.
, 2006
, “The Effect of Microstructure on Chip Formation and Surface Defects in Microscale, Mesoscale, and Macroscale Cutting of Steel
,” CIRP Ann.
, 55
(1
), pp. 97
–102
. 165.
Fischer
, C. E.
, and Bandar
, A. R.
, 2008
, “Finite Element Simulation
of
Surface Microstructure Effects in Metal Cutting
,” CIRP Workshop on High Performance Cutting
, Dublin, Ireland
, June 12–13
.166.
Ramesh
, A.
, and Melkote
, S. N.
, 2008
, “Modeling of White Layer Formation Under Thermally Dominant Conditions in Orthogonal Machining of Hardened AISI 52100 Steel
,” Int. J. Mach. Tools Manuf.
, 48
(3–4
), pp. 402
–414
. 167.
Umbrello
, D.
, Jayal
, A. D.
, Caruso
, S.
, Dillon
, O. W.
, Jr., and Jawahir
, I. S.
, 2010
, “Modeling of White and Dark Layers Formation in Hard Machining of AISI 52100 Bearing Steel
,” Mach. Sci. Technol.
, 14
(1
), pp. 128
–147
. 168.
Rotella
, G.
, Dillon
, O. W.
, Jr., Umbrello
, D.
, Settineri
, L.
, and Jawahir
, I. S.
, 2013
, “Finite Element Modeling of Microstructural Changes in Turning of AA7075-T651 Alloy
,” J. Manuf. Process.
, 15
(1
), pp. 87
–95
. 169.
Ding
, H.
, and Shin
, Y. C.
, 2014
, “Dislocation Density-Based Grain Refinement Modeling of Orthogonal Cutting of Titanium
,” ASME J. Manuf. Sci. Eng.
, 136
(4
), p. 041003
. 170.
Pu
, Z.
, Umbrello
, D.
, Dillon
, O. W.
, Lu
, T.
, Puleo
, D.
, and Jawahir
, I. S.
, 2014
, “Finite Element Modeling of Microstructural Changes in Dry and Cryogenic Machining of AZ31B Magnesium Alloy
,” J. Manuf. Process.
, 16
(2
), pp. 335
–343
. 171.
Jafarian
, F.
, Imaz Ciaran
, M.
, Umbrello
, D.
, Arrazola
, P. J.
, Filice
, L.
, and Amirabadi
, H.
, 2014
, “Finite Element Simulation of Machining Inconel 718 Alloy Including Microstructure Changes
,” Int. J. Mech. Sci.
, 88
, pp. 110
–121
. 172.
Caruso
, S.
, Imbrogno
, S.
, Rinaldi
, S.
, and Umbrello
, D.
, 2017
, “Finite Element Modeling of Microstructural Changes in Waspaloy Dry Machining
,” Int. J Adv. Manuf. Technol.
, 89
(1–4
), pp. 227
–240
. 173.
Melkote
, S. N.
, Liu
, R.
, Fernandez-Zelaia
, P.
, and Marusich
, T.
, 2015
, “A Physically Based Constitutive Model for Simulation of Segmented Chip Formation in Orthogonal Cutting of Commercially Pure Titanium
,” CIRP Ann.
, 64
(1
), pp. 65
–68
. 174.
Rinaldi
, S.
, Umbrello
, D.
, and Melkote
, S. N.
, 2021
, “Modelling the Effects of Twinning and Dislocation Induced Strengthening in Orthogonal Micro and Macro Cutting of Commercially Pure Titanium
,” Int. J. Mech. Sci.
, 190
, p. 106045
. 175.
Yen
, Y. C.
, Söhner
, J.
, Lilly
, B.
, and Altan
, T.
, 2004
, “Estimation of Tool Wear in Orthogonal Cutting Using the Finite Element Analysis
,” J. Mater. Process. Technol.
, 146
(1
), pp. 82
–91
. 176.
Attanasio
, A.
, Ceretti
, E.
, Fiorentino
, A.
, Cappellini
, C.
, and Giardini
, C.
, 2010
, “Investigation and FEM-Based Simulation of Tool Wear in Turning Operations With Uncoated Carbide Tools
,” Wear
, 269
(5
), pp. 344
–350
. 177.
Malakizadi
, A.
, Gruber
, H.
, Sadik
, I.
, and Nyborg
, L.
, 2016
, “An FEM-Based Approach for Tool Wear Estimation in Machining
,” Wear
, 368–369
, pp. 10
–24
. 178.
Filice
, L.
, Micari
, F.
, Settineri
, L.
, and Umbrello
, D.
, 2007
, “Wear Modeling in Mild Steel Orthogonal Cutting When Using Uncoated Carbide Tools
,” Wear
, 262
(5–6
), pp. 545
–554
. 179.
Coelho
, R. T.
, Ng
, E.-G.
, and Elbestawi
, M. A.
, 2007
, “Tool Wear When Turning Hardened AISI 4340 With Coated PCBN Tools Using Finishing Cutting Conditions
,” Int. J. Mach. Tools Manuf.
, 47
(2
), pp. 263
–272
. 180.
Binder
, M.
, Klocke
, F.
, and Doebbeler
, B.
, 2017
, “An Advanced Numerical Approach on Tool Wear Simulation for Tool and Process Design in Metal Cutting
,” Simul. Model. Pract. Theory
, 70
, pp. 65
–82
. 181.
Shao
, F.
, Liu
, Z.
, Wan
, Y.
, and Shi
, Z.
, 2010
, “Finite Element Simulation of Machining of Ti-6Al-4V Alloy With Thermodynamical Constitutive Equation
,” Int. J. Adv. Manuf. Technol.
, 49
(5–8
), pp. 431
–439
. 182.
List
, G.
, Nouari
, M.
, Géhin
, D.
, Gomez
, S.
, Manaud
, J. P.
, Petitcorps
, Y. L.
, and Girot
, F.
, 2014
, “Wear Behaviour of Cemented Carbide Tools in Dry Machining of Aluminium Alloy
,” Wear
, 259
(7–12
), pp. 1177
–1189
.183.
Díaz-Álvarez
, J.
, Cantero
, J. L.
, Miguélez
, H.
, and Soldani
, X.
, 2014
, “Numerical Analysis of Thermomechanical Phenomena Influencing Tool Wear in Finishing Turning of Inconel 718
,” Int. J. Mech. Sci.
, 82
, pp. 161
–169
. 184.
Lorentzon
, J.
, and Järvstråt
, N.
, 2008
, “Modeling Tool Wear in Cemented-Carbide Machining Alloy 718
,” Int. J. Mach. Tools Manuf.
, 48
(10
), pp. 1072
–1080
. 185.
Pramanik
, A.
, Zhang
, L. C.
, and Arsecularatne
, J. A.
, 2007
, “An FEM Investigation Into the Behavior of Metal Matrix Composites: Tool-Particle Interaction During Orthogonal Cutting
,” Int. J. Mach. Tools Manuf.
, 47
(10
), pp. 1497
–1506
. 186.
Ulutan
, D.
, and Özel
, T.
, 2013
, “Determination of Tool Friction in Presence of Flank Wear and Stress Distribution Based Validation Using Finite Element Simulations in Machining of Titanium and Nickel Based Alloys
,” J. Mater. Process. Technol.
, 213
(12
), pp. 2217
–2237
. 187.
Soo
, S. L.
, Aspinwall
, D. K.
, and Dewes
, R. C.
, 2004
, “3D FE Modeling of the Cutting of Inconel 718
,” J. Mater. Process. Technol.
, 150
(1–2
), pp. 116
–123
. 188.
Maurel-Pantel
, A.
, Fontaine
, M.
, Thibaud
, S.
, and Gelin
, J. C.
, 2012
, “3D FEM Simulations of Shoulder Milling Operations on a 304L Stainless Steel
,” Simul. Model. Pract. Theory
, 22
, pp. 13
–27
. 189.
Buchkremer
, S.
, Klocke
, F.
, and Lung
, D.
, 2015
, “Finite-Element-Analysis of the Relationship Between Chip Geometry and Stress Triaxiality Distribution in the Chip Breakage Location of Metal Cutting Operations
,” Simul. Model. Pract. Theory
, 55
, pp. 10
–26
. 190.
Oezkaya
, E.
, and Biermann
, D.
, “A New Reverse Engineering Method to Combine FEM and CFD Simulation Three-Dimensional Insight Into the Chipping Zone During the Drilling of Inconel 718 With Internal Cooling
,” Mach. Sci. Technol.
, 22
(6
), pp. 881
–898
. 191.
Schulze
, V.
, Zanger
, F.
, Michna
, J.
, and Lang
, F.
, 2013
, “3D-FE-Modeling of the Drilling Process—Prediction of Phase Transformations at the Surface Layer
,” Proc. CIRP
, 8
, pp. 33
–38
. 192.
Cerutti
, X.
, Arsene
, S.
, and Mocellin
, K.
, 2016
, “Prediction of Machining Quality Due to the Initial Residual Stress Redistribution of Aerospace Structural Parts Made of Low-Density Aluminium Alloy Rolled Plates
,” Int. J. Mater. Form.
, 9
(5
), pp. 677
–690
. 193.
Afrasiabi
, M.
, Meier
, L.
, Röthlin
, M.
, Klippel
, H.
, and Wegener
, K.
, 2020
, “GPU-Accelerated Meshfree Simulations for Parameter Identification of a Friction Model in Metal Machining
,” Int. J. Mech. Sci.
, 176
, p. 105571
. 194.
Ong
, Y. S.
, Nair
, P. B.
, and Keane
, A. J.
, 2003
, “Evolutionary Optimization of Computationally Expensive Problems via Surrogate Modeling
,” AIAA J.
, 41
(4
), pp. 687
–696
. 195.
Wang
, H.
, Ye
, F.
, Chen
, L.
, and Li
, E.
, 2017
, “Sheet Metal Forming Optimization by Using Surrogate Modeling Techniques
,” Chin. J. Mech. Eng.
, 30
(1
), pp. 22
–36
. 196.
Ortiz-de-Zarate
, G.
, Madariaga
, A.
, Arrazola
, P. J.
, and Childs
, T. H. C.
, 2021
, “A Novel Methodology to Characterize Tool-Chip Contact in Metal Cutting Using Partially Restricted Contact Length Tools
,” CIRP Ann.
, 70
(1
), pp. 61
–64
. 197.
Stephenson
, D. A.
, and Agapiou
, J. S.
, 2017
, Metal Cutting Theory and Practice
, 3rd ed., CRC Press
, Boca Raton, FL
, pp. 426
–431
, 463
–467
, 483
–519
.198.
Fischer
, C. E.
, 2010
, “Modeling and Simulation of Machining,” ASM Handbook
, Vol. 22B
, ASM, Materials Park
, OH
, pp. 361
–371
.199.
Liu
, W.
, Ren
, D.
, Usui
, S.
, Wadell
, J.
, and Marusich
, T. D.
, 2013
, “A Gear Cutting Predictive Model Using the Finite Element Method
,” Proc. CIRP
, 8
, pp. 51
–56
. 200.
Ma
, K.
, Goetz
, R.
, and Srivatsa
, S.
, 2010
, Modeling of Residual Stress and Machining Distortion in Aerospace Components
, Vol. 22B
, ASM Handbook
, 386
–407
.201.
Jayanti
, S.
, Ren
, D.
, Erickson
, E.
, Usui
, S.
, Marusich
, T.
, Marusich
, K.
, and Elanvogan
, H.
, 2013
, “Predictive Modeling for Tool Deflection and Part Distortion of Large Machined Components
,” Proc. CIRP
, 12
, pp. 37
–42
. 202.
Montgomery
, D.
, and Altintas
, Y.
, 1991
, “Mechanism of Cutting Force and Surface Generation in Dynamic Milling
,” ASME J. Eng. Ind.
, 113
(2
), pp. 160
–168
. 203.
Stephenson
, D. A.
, and Bandyopadhyay
, P.
, 1997
, “Process Independent Force Characterization for Machining Simulation
,” ASME J. Eng. Mater. Technol.
, 119
(1
), pp. 86
–94
. 204.
Stephenson
, D. A.
, 2002
, “Casting and Machining Process Analysis at GM Powertrain
,” SAE Technical Paper, 2002-01-0622
.205.
Ziada
, Y.
, and Yang
, J.
, 2018
, “Machining Quality Analysis of Powertrain Components Using Plane Strain Finite Element Cutting Models
,” SAE Int. J. Mater. Manuf.
, 11
(2
), pp. 113
–122
. Copyright © 2022 by ASME
You do not currently have access to this content.
