This paper deals with the dynamic parameter identification of a 3DOF parallel manipulator with actuation redundancy. A method for finding the parameter linear form of the dynamic equation is presented. Based on the virtual work principle, the dynamic equation for the application of dynamic parameter identification is obtained by extracting the dynamic parameters from inertial forces and moments of moving parts. Two-step identification approach is used to identify the dynamic parameters of the redundantly actuated parallel manipulator. The approach consists of two steps and utilizes simple point-to-point motions that lead to a separation of friction and rigid-body dynamics. The identified results are validated by experiments. Moreover, the experimental application of the identified model to a machine tool, which is created by combining the parallel manipulator with a 2DOF worktable, demonstrates the efficiency of dynamic parameter identification.
1.
Renders
, J. M.
, Rossignol
, E.
, Becquet
, M.
, and Hanus
, R.
, 1991, “Kinematic Calibration and Geometrical Parameter Identification for Robots
,” IEEE Trans. Rob. Autom.
1042-296X, 7
(6
), pp. 421
–432
.2.
Grotjahn
, M.
, and Heimann
, B.
, 2002, “Model-Based Feedforward Control in Industrial Robotics
,” Int. J. Robot. Res.
0278-3649, 21
(1
), pp. 45
–60
.3.
Honegger
, M.
, Brega
, R.
, and Schweitzer
, G.
, 2000, “Application of a Nonlinear Adaptive Controller to a 6 Dof Parallel Manipulator
,” IEEE International Confernce on Robotics and Automation
, San Francisco, CA
, Apr. pp. 1930
–1935
.4.
Dasgupta
, B.
, and Mruthyunjaya
, T. S.
, 1998, “Closed-Form Dynamic Equations of the General Stewart Platform Through the Newton–Euler Approach
,” Mech. Mach. Theory
0094-114X, 33
(7
), pp. 993
–1012
.5.
Wang
, J.
, Wu
, J.
, Wang
, L.
, and Li
, T.
, 2007, “Simplified Strategy of the Dynamic Model of a 6-UPS Parallel Kinematic Machine for Real-Time Control
,” Mech. Mach. Theory
0094-114X, 42
(9
), pp. 1119
–1140
.6.
Zhang
, C. D.
, and Song
, S. M.
, 1993, “An Efficient Method for Inverse Dynamics of Manipulators Based on the Virtual Work Principle
,” J. Rob. Syst.
0741-2223, 10
(5
), pp. 605
–627
.7.
Grotjahn
, M.
, Heimann
, B.
, Kuehn
, J.
, and Grendel
, H.
, 2004, “Dynamics of Robots With Parallel Kinematic Structure
,” The 11th World Congress in Mechanism and Machine Science
, Tianjin, China
, Apr. pp. 1689
–1693
.8.
Vivas
, A.
, Poignet
, P.
, Marquet
, F.
, Pierrot
, F.
, and Gautier
, M.
, 2003, “Experimental Dynamic Identification of a Fully Parallel Robot
,” IEEE International Conference on Robotics and Automation
, Taipei, Taiwan
, Sept. pp. 3278
–3283
.9.
Khalil
, W.
, and Dombre
, E.
, 2002, Modeling, Identification and Control of Robots
, Hermes Penton Ltd.
London
.10.
Armstrong
, B.
, Khatib
, O.
, and Burdick
, J.
, 1986, “Explicit Dynamic Model and Inertial Parameters of the PUMA 560 Arm
,” IEEE International Conference on Robotics and Automation
, San Francisco, CA
, Apr., pp. 510
–518
.11.
Khosla
, P. K.
, and Kanade
, T.
, 1985, “Parameter Identification of Robot Dynamics
,” IEEE Conference on Decision and Control
, Fort Lauderdale, FL
, Dec., pp. 1754
–1760
.12.
Wiens
, G. J.
, Shamblin
, S. A.
, and Oh, Y.-H., 2002, “Characterization of PKM Dynamics in Terms of System Identification
,” Proc. Inst. Mech. Eng., Part K: J. Multi-Body Dynamics
, 216
, pp. 59
–72
.13.
Register
, R. B.
, Mason
, P. A. C.
, and Wiens
, G. J.
, 2000, “Identification Of PKM Strut Friction Using An Extended Kalman Filter
,” 2000 Florida Conference On Recent Advances in Robotics (Web-Proceedings)
, Boca Raton, FL
, May 4–5, pp. 1
–8
.14.
Wiens
, G. J.
, and Hardage
, D. S.
, 2006, “Structural Dynamics And System Identification Of Parallel Kinematic Machines
,” ASME 2006 Design Engineering Technical Conferences and Computers and Information in Engineering Conference
, Philadelphia, PA
, Sept. 10–13, pp. 1
–10
.15.
Guegan
, S.
, Khalil
, W.
, and Lemoine
, P.
, 2003, “Identification of the Dynamic Parameters of the Orthoglide
,” IEEE International Conference on Robotics and Automation
, Taipei, Taiwan
, Sept., pp. 3272
–3277
.16.
Poignet
, P.
, Ramdani
, N.
, and Vivas
, O. A.
, 2003, “Ellipsoidal Estimation of Parallel Robot Dynamic Parameters
,” IEEE International Conference on Intelligent Robots and Systems
, Las Vegas, NV
, Oct., pp. 3300
–3305
.17.
Poignet
, P.
, Ramdani
, N.
, Vivas
, O. A.
, 2003, “Robust Estimation of Parallel Robot Dynamic Parameters with Interval Analysis
,” IEEE International Conference on Decision and Control
, Maui, HI
, Dec., pp. 6503
–6508
.18.
Wang
, J. S.
, Wu
, J.
, Wang
, L. P.
, and Li
, T. M.
, 2008, “Homing Strategy for a Redundantly Actuated Parallel Kinematic Machine
,” ASME J. Mech. Des.
1050-0472, 130
(4
), pp. 0445011
–0445015
.19.
Wu
, J.
, Wang
, J. S.
, and Wang
, L. P.
, 2008, “Optimal Kinematic Design and Application of a Redundantly Actuated 3DOF Planar Parallel Manipulator
,” ASME J. Mech. Des.
1050-0472, 130
(5
), pp. 0545031
–0545035
.Copyright © 2008
by American Society of Mechanical Engineers
You do not currently have access to this content.
