Fully-developed flow and heat transfer in periodic converging-diverging channels with rectangular cross sections are studied using computational fluid dynamics (CFD) simulations for Reynolds numbers ranging from 50 to 200. Experimental laser sheet flow visualizations have also been utilized with the aid of an enlarged transparent Perspex model, which serves as a form of secondary verification of the CFD results. The CFD investigations focus on two principal configurations of converging-diverging channels, namely the constant curvature and sinusoidal converging-diverging channel. Heat transfer simulations have been carried out under constant wall temperature conditions using liquid water as the coolant. It is found that due to the fluid mixing arising from a pair of recirculating vortices in the converging-diverging channels, the heat transfer performance is always significantly more superior to that of straight channels with the same average cross sections; at the same time the pressure drop penalty of the converging-diverging channels can be much smaller than the heat transfer enhancement. The effects of channel aspect ratio and amplitude of the converging-diverging profiles have been systematically investigated. The results show that for a steady flow, the flow pattern is generally characterized by the formation of a pair of symmetrical recirculating vortices in the two furrows of the converging-diverging channel. Both the optimal aspect ratio and channel amplitude are being presented with the support of CFD analyses. Experimental flow visualizations have also been utilized and it was found that the experimental results agrees favorably with the CFD results. The present study shows that these converging-diverging channels have prominent advantages over straight channels. The most superior configuration considered in this paper has been found to yield an improvement of up to 60% in terms of the overall thermal-hydraulic performance compared to microchannels with straight walls, thus serving as promising candidates for incorporation into efficient heat transfer devices.
Skip Nav Destination
National University of Singapore,
9 Engineering Drive 1,
National University of Singapore,
9 Engineering Drive 1,
e-mail: mpeteocj@nus.edu.sg
Article navigation
Research-Article
Mixing and Heat Transfer Enhancement in Microchannels Containing Converging-Diverging Passages
J. Q. Yong,
National University of Singapore,
9 Engineering Drive 1,
J. Q. Yong
Department of Mechanical Engineering
,National University of Singapore,
9 Engineering Drive 1,
Singapore 117576
, Singapore
Search for other works by this author on:
C. J. Teo
National University of Singapore,
9 Engineering Drive 1,
e-mail: mpeteocj@nus.edu.sg
C. J. Teo
1
Department of Mechanical Engineering
,National University of Singapore,
9 Engineering Drive 1,
Singapore 117576
, Singapore
e-mail: mpeteocj@nus.edu.sg
1Corresponding author.
Search for other works by this author on:
J. Q. Yong
Department of Mechanical Engineering
,National University of Singapore,
9 Engineering Drive 1,
Singapore 117576
, Singapore
C. J. Teo
Department of Mechanical Engineering
,National University of Singapore,
9 Engineering Drive 1,
Singapore 117576
, Singapore
e-mail: mpeteocj@nus.edu.sg
1Corresponding author.
Contributed by the Heat Transfer Division of ASME for publication in the JOURNAL OF HEAT TRANSFER. Manuscript received January 27, 2013; final manuscript received November 18, 2013; published online January 31, 2014. Assoc. Editor: Sujoy Kumar Saha.
J. Heat Transfer. Apr 2014, 136(4): 041704 (11 pages)
Published Online: January 31, 2014
Article history
Received:
January 27, 2013
Revision Received:
November 18, 2013
Citation
Yong, J. Q., and Teo, C. J. (January 31, 2014). "Mixing and Heat Transfer Enhancement in Microchannels Containing Converging-Diverging Passages." ASME. J. Heat Transfer. April 2014; 136(4): 041704. https://doi.org/10.1115/1.4026090
Download citation file:
Get Email Alerts
Cited By
On Prof. Roop Mahajan's 80th Birthday
J. Heat Mass Transfer
Thermal Hydraulic Performance and Characteristics of a Microchannel Heat Exchanger: Experimental and Numerical Investigations
J. Heat Mass Transfer (February 2025)
Related Articles
Experimental and Numerical Evaluation of a Scaled-Up Micromixer With Groove Enhanced Division Elements
J. Fluids Eng (January,2013)
Heat Transfer Characteristics and Flow Pattern Visualization for Flow Boiling in a Vertical Narrow Microchannel
J. Electron. Packag (September,2019)
Two-Phase Heat Transfer and Bubble Characteristics in a Microchannel Array
J. Heat Transfer (July,2012)
Related Proceedings Papers
Related Chapters
Introduction
Introduction to Finite Element, Boundary Element, and Meshless Methods: With Applications to Heat Transfer and Fluid Flow
List of Commercial Codes
Introduction to Finite Element, Boundary Element, and Meshless Methods: With Applications to Heat Transfer and Fluid Flow
Hydrodynamic Mass, Natural Frequencies and Mode Shapes
Flow-Induced Vibration Handbook for Nuclear and Process Equipment