The present work reports on flow boiling visualization of refrigerant R-134a in a vertical circular channel with an internal diameter of 1.33 mm and 235 mm in heated length. A quartz tube with a homogeneous Indium Tin Oxide coating is used to allow heating and simultaneous visualization. Flow patterns have been observed along the heated length with the aid of high-speed complementary metal oxide semiconductor (CMOS) digital camera. From the flow boiling visualization, seven distinct two-phase flow patterns have been observed: isolated bubbly flow, confined bubbly flow, slug flow, churn flow, slug-annular flow, annular flow, and mist flow. Two-phase flow pattern observations are presented in the form of flow pattern maps. The effects of the saturation temperature and the inlet subcooling degree on the two-phase flow pattern transitions are elucidated. Finally, the experimental flow pattern map is compared with models developed for conventional sizes as well as to a microscale map for air-water mixtures available in literature, showing a large discrepancy.
1.
Owhaib
, W.
, Martin-Callizo
, C.
, and Palm
, B.
, 2004, “Evaporative Heat Transfer in Vertical Circular Microchannels
,” Appl. Therm. Eng.
1359-4311, 24
, pp. 1241
–1253
.2.
Baker
, O.
, 1954, “Simultaneous Flow of Oil and Gas
,” Oil & Gas J.
, 53
, pp. 185
–190
. 0030-13883.
Mandhane
, J. M.
, Gregory
, G. A.
, and Aziz
, K.
, 1974, “A Flow Pattern Map for Glass-Liquid Flow in Horizontal Pipes
,” Int. J. Multiphase Flow
0301-9322, 1
, pp. 537
–553
.4.
Hewitt
, G. F.
, and Roberts
, D. N.
, 1969, “Studies of Two-Phase Flow Patterns by Simultaneous X-Ray and Flash Photography
,” Paper No. AERE-M 2159.5.
Taitel
, Y.
, and Dukler
, A. E.
, 1976, “A Model for Predicting Flow Regime Transitions in Horizontal and Near Horizontal Gas-Liquid Flow
,” AIChE J.
0001-1541, 22
(1
), pp. 47
–55
.6.
Taitel
, Y.
, Barnea
, D.
, and Dukler
, A. E.
, 1980, “Modeling Flow Pattern Transitions for Steady Upward Gas-Liquid Flow in Vertical Tubes
,” AIChE J.
0001-1541, 26
(3
), pp. 345
–354
.7.
Kaichiro
, M.
, and Ishii
, M.
, 1984, “Flow Regime Transition Criteria for Upward Two-Phase Flow in Vertical Tubes
,” Int. J. Heat Mass Transfer
0017-9310, 27
, pp. 723
–737
.8.
Spedding
, P. L.
, and Spence
, D. R.
, 1993, “Flow Regimes in Two-Phase Gas-Liquid Flow
,” Int. J. Multiphase Flow
0301-9322, 19
(2
), pp. 245
–280
.9.
Barnea
, D.
, Luninski
, Y.
, and Taitel
, Y.
, 1983, “Flow Pattern in Horizontal and Vertical Two Phase Flow in Small Diameter Pipes
,” Can. J. Chem. Eng.
0008-4034, 61
, pp. 617
–620
.10.
Fukano
, T.
, and Kariyasaki
, A.
, 1993, “Characteristics of Gas-Liquid Two-Phase Flows in a Capillary Tube
,” Nucl. Eng. Des.
0029-5493, 141
, pp. 59
–68
.11.
Coleman
, J. W.
, and Garimella
, S.
, 1999, “Characterization of Two-Phase Flow Patterns in Small Diameter Round and Rectangular Tubes
,” Int. J. Heat Mass Transfer
0017-9310, 42
, pp. 2869
–2881
.12.
Sheng
, C. H.
, 2001, “Some Two-Phase Flow and Boiling Heat Transfer Characteristics in Small Diameter Tubes
,” Licentiate thesis, Royal Institute of Technology, KTH, Sweden.13.
Satitchaicharoen
, P.
, and Wongwises
, S.
, 2004, “Two-Phase Flow Pattern Maps for Vertical Upward Gas-Liquid Flow in Mini-Gap Channels
,” Int. J. Multiphase Flow
0301-9322, 30
, pp. 225
–236
.14.
Chung
, P. M.
, and Kawaji
, M.
, 2004, “The Effect of Channel Diameter on Adiabatic Two-Phase Flow Characteristics in Microchannels
,” Int. J. Multiphase Flow
0301-9322, 30
, pp. 735
–761
.15.
Ide
, H.
, Kariyasaki
, A.
, and Fukano
, T.
, 2007, “Fundamental Data on Gas—Liquid Two-Phase Flow in Minichannels
,” Int. J. Therm. Sci.
1290-0729, 46
, pp. 519
–530
.16.
Marchessault
, R. N.
, and Mason
, S. G.
, 1960, “Flow Entrapped Bubbles Through a Capillary
,” Ind. Eng. Chem.
0019-7866, 52
, pp. 79
–84
.17.
Suo
, M.
, and Griffith
, P.
, 1964, “Two-Phase Flow in Capillary Tubes
,” ASME J. Basic Eng.
0021-9223, 86
(3
), pp. 576
–582
.18.
Oya
, T.
, 1971, “Upward Liquid Flow in Small Tube Into Which Air Streams (1st Report, Experimental Apparatus and Flow Patterns)
,” Bull. JSME
0021-3764, 14
(78
), pp. 1320
–1329
.19.
Damianides
, D. A.
, and Westwater
, J. W.
, 1988, “Two-Phase Flow Patterns in Compact Heat Exchanger and in Small Tubes
,” Proceedings of the Second UK National Conference on Heat Transfer
, Glasgow, UK, Vol. 2
, pp. 1257
–1268
.20.
Mishima
, K.
, and Hibiki
, T.
, 1996, “Some Characteristics of Air-Water Two-Phase Flow in Small Diameter Vertical Tubes
,” Int. J. Multiphase Flow
0301-9322, 22
, pp. 703
–712
.21.
Triplett
, K. A.
, Ghiaasiaan
, S. M.
, Abdel-Khalil
, S. I.
, and Sadowski
, D. L.
, 1999, “Gas-Liquid Two-Phase Flow in Micro-Channels Part I: Two-Phase Flow Patterns
,” Int. J. Multiphase Flow
0301-9322, 25
, pp. 377
–394
.22.
Serizawa
, A.
, Feng
, Z.
, and Kawara
, Z.
, 2002, “Two-Phase Flow in Microchannel
,” Exp. Therm. Fluid Sci.
0894-1777, 26
, pp. 703
–714
.23.
Kawahara
, A.
, Cheng
, P. M.-Y.
, and Kawaji
, M.
, 2002, “Investigation of Two-Phase Flow Pattern, Void Fraction and Pressure Drop in a Microchannel
,” Int. J. Multiphase Flow
0301-9322, 28
, pp. 1411
–1435
.24.
Hetsroni
, G.
, Mosyak
, A.
, Segal
, Z.
, and Pogrebnyak
, E.
, 2003, “Two-Phase Flow Patterns in Parallel Micro-Channels
,” Int. J. Multiphase Flow
0301-9322, 29
, pp. 341
–360
.25.
Yang
, Ch. -Y.
, and Shieh
, Ch. -Ch.
, 2001, “Flow Pattern of Air-Water and Two-Phase R-134a in Small Circular Tubes
,” Int. J. Multiphase Flow
0301-9322, 27
, pp. 1163
–1177
.26.
Garimella
, S.
, Killion
, J. D.
, and Coleman
, J. W.
, 2002, “An Experimental Validated Model for Two-Phase Pressure Drop in the Intermittent Flow Regime for Circular Channel
,” ASME J. Fluids Eng.
0098-2202, 124
, pp. 205
–214
.27.
Huo
, X.
, Chen
, L.
, Tian
, Y. S.
, and Karayiannis
, T. G.
, 2004, “Flow Boiling and Flow Regimes in Small Diameter Tubes
,” Appl. Therm. Eng.
1359-4311, 24
, pp. 1225
–1239
.28.
Chen
, L.
, Tian
, Y. S.
, and Karayiannis
, T. G.
, 2005, “Vertical Upward Flow Patterns in Small Diameter Tubes
,” Proceedings of the Sixth World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics
, Matsushima, Japan, Paper No. 9-b-4.29.
Chen
, L.
, Tian
, Y. S.
, and Karayiannis
, T. G.
, 2006, “The Effect of Tube Diameter on Vertical Two-Phase Flow Regimes in Small Tubes
,” Int. J. Heat Mass Transfer
0017-9310, 49
, pp. 4220
–4230
.30.
Revellin
, R.
, and Thome
, J. R.
, 2007, “Experimental Investigation of R-134a and R-245fa Two-Phase Flow in Microchannel for Different Flow Conditions
,” Int. J. Heat Mass Transfer
0017-9310, 28
, pp. 63
–71
.31.
NIST
, 2002, National Institute of Standard and Technology, REFRPROP Version 7.0, Boulder, CO.32.
Kline
, S. J.
, and McClintock
, F. A.
, 1953, “Describing Uncertainties in Single-Sample Experiments
,” Mech. Eng. (Am. Soc. Mech. Eng.)
0025-6501, 75
, pp. 3
–8
.33.
Collier
, J. G.
, and Thome
, J. R.
, 1994, Convective Boiling and Condensation
, 3rd ed., Oxford Science
, New York
, pp. 1
–33
and 184
.34.
Owhaib
, W.
, Palm
, B.
, and Martín-Callizo
, C.
, 2007, “A Visualization Study of Bubble Behavior in Saturated Flow Boiling Through a Vertical Mini-Tube
,” Heat Transfer Eng.
0145-7632, 28
(10
), pp. 852
–860
.Copyright © 2010
by American Society of Mechanical Engineers
You do not currently have access to this content.
