Results from a combined experimental and numerical investigation of buoyancy driven flow and heat transfer in a narrow annular gap between co-axial, horizontal cylinders are presented in this work. The annulus is open at both ends through which the ambient fluid can interact with the fluid inside the gap. In the experimental study, a constant heat flux was utilized to simulate buoyancy induced convection in an open ended annular cavity with a low gap to inner cylinder radius ratio; local surface temperature measurements were made to determine heat transfer characteristics of the convective flow. The heat transfer results are correlated by Nu = 0.134(Ra*)0.264 for the range of Rayleigh numbers considered (7.09 ×108 ≤ Ra* ≤ 4.76 × 109) in the experiments. In the numerical investigation, solutions to the three-dimensional time-averaged (Reynolds) steady-state equations of fluid motion and heat transfer were obtained using a finite element analysis. Results of the conjugate study including the local temperature distributions, heat transfer coefficients, and the flow field showing the interactions between the ambient and cavity flow fields agree favorably with experimental results. An investigation was also carried out to study the effect of axial length and the gap width of the annulus. A correlation for the average Nusselt number as a function of Rayleigh number, axial length and gap width has been obtained. The present work provides, for the first time, an experimental and numerical study of turbulent buoyancy induced flows in a narrow open-ended annulus.
Skip Nav Destination
e-mail: vafai.l@osu.edu
Article navigation
Research Papers
Buoyancy Induced Convection in a Narrow Open-Ended Annulus
K. Vafai,
K. Vafai
Department of Mechanical Engineering, The Ohio State University, Columbus, OH 43210
e-mail: vafai.l@osu.edu
Search for other works by this author on:
C. P. Desai,
C. P. Desai
BF Goodrich Aerospace, Troy, OH 45373
Search for other works by this author on:
S. V. Iyer,
S. V. Iyer
Department of Mechanical Engineering, The Ohio State University, Columbus, OH 43210
Search for other works by this author on:
M. P. Dyko
M. P. Dyko
ABS Corporation, Akron, OH 44306
Search for other works by this author on:
K. Vafai
Department of Mechanical Engineering, The Ohio State University, Columbus, OH 43210
e-mail: vafai.l@osu.edu
C. P. Desai
BF Goodrich Aerospace, Troy, OH 45373
S. V. Iyer
Department of Mechanical Engineering, The Ohio State University, Columbus, OH 43210
M. P. Dyko
ABS Corporation, Akron, OH 44306
J. Heat Transfer. Aug 1997, 119(3): 483-494 (12 pages)
Published Online: August 1, 1997
Article history
Received:
September 13, 1996
Revised:
April 3, 1997
Online:
December 5, 2007
Connected Content
A correction has been published:
Erratum: “Buoyancy-Induced Convection in a Narrow Open-Ended Annulus” (ASME J. Heat Transfer, 1997, 119, pp. 483–494)
Citation
Vafai, K., Desai, C. P., Iyer, S. V., and Dyko, M. P. (August 1, 1997). "Buoyancy Induced Convection in a Narrow Open-Ended Annulus." ASME. J. Heat Transfer. August 1997; 119(3): 483–494. https://doi.org/10.1115/1.2824122
Download citation file:
Get Email Alerts
Cited By
On Prof. Roop Mahajan's 80th Birthday
J. Heat Mass Transfer
Thermal Hydraulic Performance and Characteristics of a Microchannel Heat Exchanger: Experimental and Numerical Investigations
J. Heat Mass Transfer (February 2025)
Related Articles
Natural Convection in an Inclined Fluid Layer With a Transverse Magnetic Field: Analogy With a Porous Medium
J. Heat Transfer (February,1995)
Transient Double Diffusive Convection in a Vertical Enclosure With Asymmetrical Boundary Conditions
J. Heat Transfer (August,2000)
Experimental and Theoretical Investigations of Heat Transfer in Closed Gas-Filled Rotating Annuli
J. Turbomach (January,1995)
Natural Convection of Viscoplastic Fluids in a Square Enclosure
J. Heat Transfer (December,2013)
Related Proceedings Papers
Related Chapters
Applications
Introduction to Finite Element, Boundary Element, and Meshless Methods: With Applications to Heat Transfer and Fluid Flow
Extended Surfaces
Thermal Management of Microelectronic Equipment, Second Edition
Extended Surfaces
Thermal Management of Microelectronic Equipment