Abstract

A comprehensive operational characterisation of a representative, Liquid Hydrogen (LH2) aircraft engine pump is presented in this work. The implications of leakage flows are investigated in a 2-stage, high-pressure pump for a wide range of flow rates and rotational speeds, through 3D (U)RANS simulations. Two configurations are compared: a baseline model comprising the primary flow path components - inducers, impellers and volutes and a realisable pump hardware that includes hub, shroud and power unit cavities. Performance metrics, including head changes and efficiencies, are extracted both at a component and system level.

Leakage flow rates of 27.6% and up to 92.9% of the overall pump flow rate are recorded at design and lowest flow points respectively. The head loss in the mid to low flow rates does not exceed 4.5%, but the efficiency diminishes by up to 13.5% at off-design operation. The component analysis indicates significant penalties in impeller efficiency. At high flow rates, the presence of leakage flows improves the overall pump performance by 43% and 27% in head rise and efficiency, due to reduced losses in volutes and connecting ducts. The characterisation of pump behaviour described in this work is crucial for developing and designing safe and predictable LH2 aircraft pumps. Contrary to LH2 pumps utilized in rocketry and for cooling in nuclear industry, aircraft pumps are required to operate with wider turn-down ratios and often at low specific speeds. Therefore, this study addresses design considerations for this enabling technology.

This content is only available via PDF.
You do not currently have access to this content.