Today's power market asks for highly efficient turbines which can operate at a maximum flexibility, achieving a high lifetime and all of this on competitive product costs. In order to increase the plant cycle efficiency, during the past years, nominal steam temperatures and pressures have been continuously increased. To fulfill the lifetime requirements and still achieve the product cost requirements, accurate mechanical integrity based assessments on cyclic lifetime became more and more important. For this reason, precise boundary conditions in terms of local temperatures as well as heat transfer coefficients are essential. In order to gain such information and understand the flow physics behind them, more and more complex thermal modeling approaches are necessary, like computational fluid dynamics (CFD) or even conjugate heat transfer (CHT). A proper application of calculation rules and methods is crucial regarding the determination of thermal stresses, thermal expansion, lifetime, or creep. The aim is to exploit during turbine developments the limits of the designs with the selected materials. A huge effort especially in validation and understanding of those methodologies was done with detailed numerical investigations associated to extensive measurement studies at onsite turbines in operation. This paper focuses on the validation of numerical models based on CHT calculations against experimental data of a large intermediate pressure steam turbine module regarding the temperature distribution at the inner and outer casing for nominal load as well as transient shut-down.
Skip Nav Destination
Article navigation
March 2017
Research-Article
Thermal Modeling of an Intermediate Pressure Steam Turbine by Means of Conjugate Heat Transfer—Simulation and Validation
Stefan Koch,
Stefan Koch
Institute of Energy Systems and Fluid
Engineering (IEFE),
University ZHAW,
Amriswilerstrasse 32a,
Romanshorn 8590, Switzerland
e-mail: koch.stefan@bluewin.ch
Engineering (IEFE),
University ZHAW,
Amriswilerstrasse 32a,
Romanshorn 8590, Switzerland
e-mail: koch.stefan@bluewin.ch
Search for other works by this author on:
Daniel Schumacher
Daniel Schumacher
Institute of Energy Systems and Fluid
Engineering (IEFE),
University ZHAW,
Waldeggstrasse 36,
Winterthur 8405, Switzerland
e-mail: daniel.schumacher.ch@gmail.com
Engineering (IEFE),
University ZHAW,
Waldeggstrasse 36,
Winterthur 8405, Switzerland
e-mail: daniel.schumacher.ch@gmail.com
Search for other works by this author on:
Dominik Born
Peter Stein
Gabriel Marinescu
Stefan Koch
Institute of Energy Systems and Fluid
Engineering (IEFE),
University ZHAW,
Amriswilerstrasse 32a,
Romanshorn 8590, Switzerland
e-mail: koch.stefan@bluewin.ch
Engineering (IEFE),
University ZHAW,
Amriswilerstrasse 32a,
Romanshorn 8590, Switzerland
e-mail: koch.stefan@bluewin.ch
Daniel Schumacher
Institute of Energy Systems and Fluid
Engineering (IEFE),
University ZHAW,
Waldeggstrasse 36,
Winterthur 8405, Switzerland
e-mail: daniel.schumacher.ch@gmail.com
Engineering (IEFE),
University ZHAW,
Waldeggstrasse 36,
Winterthur 8405, Switzerland
e-mail: daniel.schumacher.ch@gmail.com
Contributed by the Heat Transfer Committee of ASME for publication in the JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Manuscript received June 20, 2016; final manuscript received July 19, 2016; published online October 4, 2016. Editor: David Wisler.
J. Eng. Gas Turbines Power. Mar 2017, 139(3): 031903 (10 pages)
Published Online: October 4, 2016
Article history
Received:
June 20, 2016
Revised:
July 19, 2016
Citation
Born, D., Stein, P., Marinescu, G., Koch, S., and Schumacher, D. (October 4, 2016). "Thermal Modeling of an Intermediate Pressure Steam Turbine by Means of Conjugate Heat Transfer—Simulation and Validation." ASME. J. Eng. Gas Turbines Power. March 2017; 139(3): 031903. https://doi.org/10.1115/1.4034513
Download citation file:
Get Email Alerts
Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability
J. Eng. Gas Turbines Power
Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions
J. Eng. Gas Turbines Power
Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials
J. Eng. Gas Turbines Power
Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling
J. Eng. Gas Turbines Power
Related Articles
Brush Seal Temperature Distribution Analysis
J. Eng. Gas Turbines Power (July,2006)
Integrated Approach for Steam Turbine Thermostructural Analysis and Lifetime Prediction at Transient Operations
J. Eng. Gas Turbines Power (February,2018)
Computational Heat Transfer Analysis of the Effect of Skirts on the Performance of Third-World Cookstoves
J. Thermal Sci. Eng. Appl (December,2009)
Thermal Performance Analysis of Geologic High-Level Radioactive Waste Packages
J. Pressure Vessel Technol (December,2011)
Related Proceedings Papers
Related Chapters
Radiation
Thermal Management of Microelectronic Equipment
Radiation
Thermal Management of Microelectronic Equipment, Second Edition
Source Items Treatment of Coupled Heat Transfer of Radiation and Convection
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)