This paper describes experimental work performed at General Electric, Global Research Center to evaluate the performance and understand the risks of using dry low (DLN) technologies in exhaust gas recirculation (EGR) conditions. Exhaust gas recirculation is viewed as an enabling technology for increasing the concentration of the flue gas while decreasing the volume of the postcombustion separation plant and therefore allowing a significant reduction in capture cost. A research combustor was developed for exploring the performance of nozzles operating in low environment at representative pressures and temperatures. A series of experiments in a visually accessible test rig have been performed at gas turbine pressures and temperatures, in which inert gases such as were used to vitiate the fresh air to the levels determined by cycle models. Moreover, the paper discusses experimental work performed using a DLN nozzle used in GE’s F-class heavy-duty gas turbines. Experimental results using a research combustor operating in a partially premixed mode include the effect of EGR on operability, efficiency, and emission performance under conditions of up to 40% EGR. Experiments performed in a fully premixed mode using a DLN single nozzle combustor revealed that further reductions in could be achieved while at the same time still complying with CO emissions. While most existing studies concentrate on limitations related to the minimum oxygen concentration (MOC) at the combustor exit, we report the importance of levels in the oxidizer. This limitation is as important as the MOC, and it varies with the pressure and firing temperatures.
Skip Nav Destination
Article navigation
Technical Briefs
Application of Exhaust Gas Recirculation in a DLN F-Class Combustion System for Postcombustion Carbon Capture
Ahmed M. ElKady,
Ahmed M. ElKady
General Electric,
Global Research Center
, Niskayuna, NY 12309
Search for other works by this author on:
Andrei Evulet,
Andrei Evulet
General Electric,
Global Research Center
, Niskayuna, NY 12309
Search for other works by this author on:
Anthony Brand,
Anthony Brand
General Electric,
Global Research Center
, Niskayuna, NY 12309
Search for other works by this author on:
Tord Peter Ursin,
Tord Peter Ursin
StatoilHydro ASA,
Technology and New Energy
, N-4035 Stavanger, Norway
Search for other works by this author on:
Arne Lynghjem
Arne Lynghjem
StatoilHydro ASA,
Technology and New Energy
, N-4035 Stavanger, Norway
Search for other works by this author on:
Ahmed M. ElKady
General Electric,
Global Research Center
, Niskayuna, NY 12309
Andrei Evulet
General Electric,
Global Research Center
, Niskayuna, NY 12309
Anthony Brand
General Electric,
Global Research Center
, Niskayuna, NY 12309
Tord Peter Ursin
StatoilHydro ASA,
Technology and New Energy
, N-4035 Stavanger, Norway
Arne Lynghjem
StatoilHydro ASA,
Technology and New Energy
, N-4035 Stavanger, NorwayJ. Eng. Gas Turbines Power. May 2009, 131(3): 034505 (6 pages)
Published Online: February 19, 2009
Article history
Received:
April 7, 2008
Revised:
July 31, 2008
Published:
February 19, 2009
Citation
ElKady, A. M., Evulet, A., Brand, A., Ursin, T. P., and Lynghjem, A. (February 19, 2009). "Application of Exhaust Gas Recirculation in a DLN F-Class Combustion System for Postcombustion Carbon Capture." ASME. J. Eng. Gas Turbines Power. May 2009; 131(3): 034505. https://doi.org/10.1115/1.2982158
Download citation file:
Get Email Alerts
Experimental Identification Of Blade Tip Rub Forces At Engine Relevant Temperatures And Speeds
J. Eng. Gas Turbines Power
Study Of Tandem Rotor Dual Wake Interaction With Downstream Stator Under Unsteady Numerical Approach
J. Eng. Gas Turbines Power
Experimental Design Validation of a Swirl-Stabilized Burner With Fluidically Variable Swirl Number
J. Eng. Gas Turbines Power (April 2025)
Experimental Characterization of a Bladeless Air Compressor
J. Eng. Gas Turbines Power (April 2025)
Related Articles
FLOX ® Combustion at High Pressure With Different Fuel Compositions
J. Eng. Gas Turbines Power (January,2008)
Chemical-Looping Combustion for Combined Cycles With CO 2 Capture
J. Eng. Gas Turbines Power (July,2006)
Parametric Simulation of Turbulent Reacting Flow and Emissions in a Lean Premixed Reverse Flow Type Gas Turbine Combustor
J. Eng. Gas Turbines Power (February,2012)
FLOX ® Combustion at High Power Density and High Flame Temperatures
J. Eng. Gas Turbines Power (December,2010)
Related Proceedings Papers
Related Chapters
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Thermodynamic Performance
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
A Simple Carburetor
Case Studies in Fluid Mechanics with Sensitivities to Governing Variables