This paper presents the results of an evaluation of advanced combined cycle gas turbine plants with precombustion capture of CO2 from natural gas. In particular, the designs are carried out with the objectives of high efficiency, low capital cost, and low emissions of carbon dioxide to the atmosphere. The novel cycles introduced in this paper are comprised of a high-pressure syngas generation island, in which an air-blown partial oxidation reformer is used to generate syngas from natural gas, and a power island, in which a CO2-lean syngas is burnt in a large frame machine. In order to reduce the efficiency penalty of natural gas reforming, a significant effort is spent evaluating and optimizing alternatives to recover the heat released during the process. CO2 is removed from the shifted syngas using either CO2 absorbing solvents or a CO2 membrane. CO2 separation membranes, in particular, have the potential for considerable cost or energy savings compared with conventional solvent-based separation and benefit from the high-pressure level of the syngas generation island. A feasibility analysis and a cycle performance evaluation are carried out for large frame gas turbines such as the 9FB. Both short-term and long-term solutions have been investigated. An analysis of the cost of CO2 avoided is presented, including an evaluation of the cost of modifying the combined cycle due to CO2 separation. The paper describes a power plant reaching the performance targets of 50% net cycle efficiency and 80% CO2 capture, as well as the cost target of 30$ per ton of CO2 avoided (2006 Q1 basis). This paper indicates a development path to this power plant that minimizes technical risks by incremental implementation of new technology.

1.
Steeneveldt
,
R.
,
Berger
,
B.
, and
Torp
,
T. A.
, 2006, “
CO2 Capture and Storage: Closing the Knowing: Doing Gap
,”
Chem. Eng. Res. Des.
0263-8762,
84
(
9
), pp.
739
763
.
2.
Kvamsdal
,
H.
,
Jordal
,
K.
, and
Bolland
,
O.
, 2007, “
A Quantitative Comparison of Gas Turbine Cycles With CO2 Capture
,”
Energy
0360-5442,
32
(
1
), pp.
10
29
.
3.
Finkenrath
,
M.
,
Ursin
T.
,
Hoffmann
,
S.
,
Bartlett
,
M.
,
Evulet
,
A.
,
Bowman
,
M.
,
Lynghjem
,
A.
, and
Jakobsen
,
J.
, 2007, “
Performance and Cost Analysis of a Novel Gas Turbine Cycle With CO2
Capture,” ASME Paper No. GT2007-27764.
4.
Finkenrath
,
M.
,
Eckstein
,
J.
,
Hoffmann
,
S.
,
Bartlett
,
M.
,
Evulet
,
A.
,
Bowman
,
M. J.
,
Lynghjem
,
A.
,
Jakobsen
,
J.
, and
Ursin
,
T. P.
, 2006, “
Advanced Gas Turbine Cycles With CO2
Removal,”
Proceedings of the 8th International Conference on Greenhouse Gas Control Technologies
, Trondheim, Norway, Jun. 19–22, Paper No. GHGT-8.
5.
Shekhawat
,
D.
,
Luebke
,
D. R.
, and
Pennline
,
H. W.
, 2003, “
A Review of Carbon Dioxide Selective Membranes: A Topical Report
,” United States Department of Energy,
National Energy Technology Laboratory
, Report No. DOE/NETL-2003/12001.
6.
GE Patent Application No. US11/960865, “
Method for High Efficiency Fuel Decarbonisation
,” filed Aug. 7, 2006.
7.
GE Patent Application No. US11/462867, “
Systems and Methods for Power Generation with Carbon Dioxide Isolation
,” filed Dec. 20, 2007.
8.
Lacy
,
B. P.
,
McManus
,
K. R.
,
Varatharajan
,
B.
, and
Shome
,
B.
, 2005, “
Premixer Design for High Hydrogen Fuels
,”
OSTI
Technical Report No. 889756.
9.
Evulet
,
A.
, and
Elkady
,
A.
, 2006, “
Advanced Combustion Trends for CO2
Capture-ready Plants,”
GE Global Research
, Report No. 2006GRC610.
You do not currently have access to this content.