The potential performance gain of utilizing pulse detonation combustion in the bypass duct of a turbofan engine for possible elimination of the traditional afterburner was investigated in this study. A pulse detonation turbofan engine concept without an afterburner was studied and its performance was assessed. The thrust, specific fuel consumption (SFC), and specific thrust of a conventional turbofan with an afterburner and the new pulse detonation turbofan engine concept were calculated and compared. The pulse detonation device performance in the bypass duct was obtained by using multidimensional CFD analysis. The results showed that significant performance gains can be obtained by using the pulse detonation turbofan engine concept as compared to the conventional afterburning turbofan engine. In particular, it was demonstrated that for a pulse detonation bypass duct operating at a frequency of 100 Hz and higher, the thrust and specific thrust of a pulse-detonation turbofan engine can nearly be twice as much as those of the conventional afterburning turbofan engine. SFC was also shown to be reduced. The effects of fuel-air mixture equivalence ratio and partial filling on performance were also predicted. However, the interaction between pulse detonation combustion in the bypass duct and the engine fan, for potential fan stall, and engine nozzle have not been investigated in this study.

Issue Section:
Gas Turbines: Aircraft Engine
Keywords:
aerospace engines, aerospace propulsion, gas turbines, nozzles, combustion, detonation, fuel, mixing
Topics:
Engines, Explosions, Thrust, Turbofans, Combustion, Computational fluid dynamics, Cycles, Fuels, Pressure
1.
Lynch, E. D., Edelman, R. B., and Palaniswamy, S., 1992, “Computational Fluid Dynamic Analysis of the Pulse Detonation Engine Concept,” AIAA Paper No. 92-0264.
2.
Eidelman, S., Grossmann, W., and Lottati, I., 1990, “Computational Analysis of Pulsed Detonation Engines and Applications,” AIAA Paper No. 90-0460.
3.
Eidelman, S., Grossmann, W., and Lottati, I., 1990, “Air-Breathing Pulsed Detonation Engine Concept: A Numerical Study,” AIAA Paper No. 90-2420.
4.
Eidelman, S., and Grossmann, W., 1992, “Pulsed Detonation Engine Experimental and Theoretical Review,” AIAA Paper No. 92-3168.
5.
Eidelman, S., Grossmann, W., and Lottati, I., 1989, “A Review of Propulsion Applications of the Pulsed Detonation Engine Concept,” AIAA Paper No. 89-2446.
6.
Cambier, J. L, and Adelman, H. G., 1988, “Preliminary Numerical Simulations of a Pulsed Detonation Wave Engine,” AIAA Paper No. 88-2960.
7.
Bussing, T. R. A., and Pappas, G., 1994, “An Introduction to Pulse Detonation Engines,” AIAA Paper No. 94-0263.
8.
Bussing, T. R. A., Hinkey, J. B., and Kaye, L., 1994, “Pulse Detonation Engine Preliminary Design Considerations,” AIAA Paper No. 94-3220.
9.
Bratkovich, T. E., and Bussing, T. R. A., 1995, “A Pulse Detonation Engine Performance Model,” AIAA Paper No. 95-3155.
10.
Mawid, M. A., Park, T. W., and Sekar, B., 1999, “Numerical Analysis of Pulse Detonation Engines Using Global and Reduced Hydrocarbon Kinetics,” AIAA Paper No. 99-4901.
11.
Cambier, J.-L., 1999, “Preliminary Modeling of Pulse Detonation Rocket Engines,” AIAA Paper No. 99-2659.
12.
Sekar, B., Palaniswamy, S., Peroomian, O., and Chakravarthy, S., 1998, “A Numerical Study of the Pulse Detonation Wave Engine with Hydrocarbon Fuels,” AIAA Paper No. 98-3880.
13.
Lynch, E. D., Edelman, and Palaniswamy, C., 1994, “Computational Fluid Dynamic Analysis of the Pulse Detonation Engine Concept,” AIAA Paper No. 94-0264.
14.
Westbrook
,
C. K.
, and
Pitz
,
W.
,
1984
, “
A Comprehensive Chemical Kinetic Reaction Mechanism for the Oxidation and Pyrolysis of Propane and Propene
,”
Combust. Sci. Technol.
,
37
, pp.
117
–
152
.
15.
Talley, D., and Schauer, F., 1999, “Overview of Pulse Detonated Engines (Air Force),” invited paper at 49th JANNAF Propulsion Meeting, Tucson, AZ.
16.
Schauer, F., Stutrud, J., and Bradley, R., 1999, “AFRL’s In-House Research Pulse Detonation Engine,” invited paper at 11th PERC Symposium, The Pennsylvania State University, University Park, PA, 1999.
17.
Computational Dynamics Limited, 1999, STAR-CD Manuals, Version 3.1.
18.
Kailasanath, K., Patnaik, G., and Li, C., 1999, “Computational Studies of Pulse Detonation Engines: A Status Report,” AIAA Paper No. 99-2634.
Copyright © 2003
 by ASME
You do not currently have access to this content.