Catalytic systems play an important role in hydrogen production via ethanol reforming. The effect of Ni loading on the characteristics and activities of Ni/Al2O3 catalysts used in pure ethanol steam reforming are not well-understood. Two series of catalysts with various Ni loadings (6, 8, 10, 12, and 20 wt. %) were prepared by impregnation (IMP) and precipitation (PT) methods and were tested in reforming reactions. The catalysts were characterized by Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), temperature-programmed reduction (TPR), and scanning electron microscopy and energy dispersive X-ray spectroscopy (SEM–EDAX). Powder XRD patterns of all the catalysts exhibited only NiO. Lower Ni loading catalysts were more efficient in H2 production, as evidenced by the finding that a 6 wt. % Ni catalyst, synthesized via the PT method, yielded 3.68 mol H2 per mol ethanol fed. The high surface area and small crystallite size of the low Ni loading catalysts resulted in sufficient dispersion and strong metal-support interactions, which closely related to the high activity of the 6 PT catalyst.
Skip Nav Destination
Article navigation
March 2014
Research-Article
Hydrogen Production Via Ethanol Steam Reforming Over Ni/Al2O3 Catalysts: Effect of Ni Loading
Ahmed Bshish,
Ahmed Bshish
1
Department of Chemical and
Process Engineering,
Faculty of Engineering,
Selangor,
e-mail: ahmedbshish@gmail.com
Process Engineering,
Faculty of Engineering,
Universiti Kebangsaan Malaysia (UKM)
,Bangi 43600
,Selangor,
Malaysia
e-mail: ahmedbshish@gmail.com
1Corresponding authors.
Search for other works by this author on:
Zahira Yaakob,
Zahira Yaakob
1
Department of Chemical and
Process Engineering,
Faculty of Engineering,
Selangor,
e-mail: zahira65@yahoo.com
Process Engineering,
Faculty of Engineering,
Universiti Kebangsaan Malaysia (UKM)
,Bangi 43600
,Selangor,
Malaysia
e-mail: zahira65@yahoo.com
1Corresponding authors.
Search for other works by this author on:
Ali Ebshish,
Ali Ebshish
Department of Chemical and
Process Engineering,
Faculty of Engineering,
Selangor,
Process Engineering,
Faculty of Engineering,
Universiti Kebangsaan Malaysia (UKM)
,Bangi 43600
,Selangor,
Malaysia
Search for other works by this author on:
Fatah H. Alhasan
Fatah H. Alhasan
Catalysis Science and Technology
Research Centre,
Faculty of Science,
UPM Serdang,
Research Centre,
Faculty of Science,
Universiti Putra Malaysia
,UPM Serdang,
Selangor 43400
, Malaysia
Search for other works by this author on:
Ahmed Bshish
Department of Chemical and
Process Engineering,
Faculty of Engineering,
Selangor,
e-mail: ahmedbshish@gmail.com
Process Engineering,
Faculty of Engineering,
Universiti Kebangsaan Malaysia (UKM)
,Bangi 43600
,Selangor,
Malaysia
e-mail: ahmedbshish@gmail.com
Zahira Yaakob
Department of Chemical and
Process Engineering,
Faculty of Engineering,
Selangor,
e-mail: zahira65@yahoo.com
Process Engineering,
Faculty of Engineering,
Universiti Kebangsaan Malaysia (UKM)
,Bangi 43600
,Selangor,
Malaysia
e-mail: zahira65@yahoo.com
Ali Ebshish
Department of Chemical and
Process Engineering,
Faculty of Engineering,
Selangor,
Process Engineering,
Faculty of Engineering,
Universiti Kebangsaan Malaysia (UKM)
,Bangi 43600
,Selangor,
Malaysia
Fatah H. Alhasan
Catalysis Science and Technology
Research Centre,
Faculty of Science,
UPM Serdang,
Research Centre,
Faculty of Science,
Universiti Putra Malaysia
,UPM Serdang,
Selangor 43400
, Malaysia
1Corresponding authors.
Contributed by the Advanced Energy Systems Division of ASME for publication in the JOURNAL OF ENERGY RESOURCES TECHNOLOGY. Manuscript received December 18, 2012; final manuscript received May 15, 2013; published online September 12, 2013. Assoc. Editor: Sarma V. Pisupati.
J. Energy Resour. Technol. Mar 2014, 136(1): 012601 (13 pages)
Published Online: September 12, 2013
Article history
Received:
December 18, 2012
Revision Received:
May 15, 2013
Citation
Bshish, A., Yaakob, Z., Ebshish, A., and Alhasan, F. H. (September 12, 2013). "Hydrogen Production Via Ethanol Steam Reforming Over Ni/Al2O3 Catalysts: Effect of Ni Loading." ASME. J. Energy Resour. Technol. March 2014; 136(1): 012601. https://doi.org/10.1115/1.4024915
Download citation file:
Get Email Alerts
Fuel Consumption Prediction in Dual-Fuel Low-Speed Marine Engines With Low-Pressure Gas Injection
J. Energy Resour. Technol (December 2024)
A Semi-Analytical Rate-Transient Analysis Model for Fractured Horizontal Well in Tight Reservoirs Under Multiphase Flow Conditions
J. Energy Resour. Technol (November 2024)
Experimental Investigation of New Combustion Chamber Geometry Modification on Engine Performance, Emission, and Cylinder Liner Microstructure for a Diesel Engine
J. Energy Resour. Technol (December 2024)
Downdraft Gasification for Biogas Production: The Role of Artificial Intelligence
J. Energy Resour. Technol (December 2024)
Related Articles
Physical-Chemical and Thermodynamic Analyses of Ethanol Steam Reforming for Hydrogen Production
J. Fuel Cell Sci. Technol (August,2006)
Hydrogen Production From Petroleum Hydrocarbons
J. Electrochem. En. Conv. Stor (February,2021)
Catalytic Steam Reforming of Glycerol Over Cerium and Palladium-Based Catalysts for Hydrogen Production
J. Fuel Cell Sci. Technol (April,2013)
Numerical Simulation of Operating Parameters in a Methane Fueled Steam Reforming Reactor
J. Fuel Cell Sci. Technol (October,2011)
Related Proceedings Papers
Related Chapters
Advances in Catalysts for Refining Processes
Petroleum Refining and Natural Gas Processing
New Generation Reactors
Energy and Power Generation Handbook: Established and Emerging Technologies
External Events PSA for Ringhals 2 PWR (PSAM-0159)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)